AM10T-IZ Datasheet, PDF (2/3 Pages) AIMTEC – 10 Watt | DC-DC Converter

Isolation Specifications
Parameters
Tested I/O voltage
Resistance
Capacitance
Conditions
60 sec
Typical
> 1000
470
Series AM10T-IZ
10 Watt | DC-DC Converter
Rated
1500
Units
VDC
MOhm
pF
Output Specifications
Parameters
Voltage accuracy
Short Circuit protection
Short Circuit restart
Over voltage protection
Over load protection
Line voltage regulation
Load voltage regulation (Single)
Load voltage regulation (Dual)
Temperature coefficient
Ripple & Noise
Conditions
Zener diode clamp
Auto recovery
HL-LL
0 – 100% full load
0 – 100% full load
3.3 & 5V models
12 & 15V models
Typical
±2
Continuous
Auto recovery
>110%
Over 110% full load
±0.5
±0.5
±2
±0.05
80 mV p-p
1% Vout p-p
Maximum
Units
%
VDC
%
%
%
%/^oC
mV
General Specifications
Parameters
Conditions
Typical
Maximum
Units
Switching frequency
100% load
300
KHz
Operating temperature
Derating above +50 ^oC
-40 to +75
o_C
Storage temperature
-55 to +115
o_C
Case Temperature
+95
o_C
Cooling
Free air convection
Humidity
95
%
Case material
Nickel coated cooper
Weight
18
g
Dimensions (L x W x H)
MTBF
Tolerance ±0.02 inch, ±0.5mm
1.25 x 0.80 x 0.40 inches 31.80 x 20.30 x 10.20 mm
> 700 000 hrs (MIL-HDBK -217F, Ground Benign, t=+25^oC)
NOTE: All specifications in this datasheet are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at
rated output load unless otherwise specified.
Safety Specifications
Standards
Agency approvals
Safety
UL (pending)
EN 55022, class A
EN 55024
www.aimtec.com
F 051e R12.A
Tel: [phone]
2 of 3
Toll free: + 1 888 9 AIMTEC
(924 6832)
North America only