AMEPR30D-AZ_13 Datasheet, PDF (1/5 Pages) AIMTEC – up to 2A | AC-DC / DC-DC LED driver

Series AMEPR30D-AZ
up to 2A | AC-DC / DC-DC LED driver
FEATURES:
• AC-DC or DC-DC Constant current LED Driver
• Input range 90-264VAC/47-440Hz
• Active PFC with TRIAC dimmable^②
• Operating temperature -20 to 80°C
• Total Harmonic Distortion < 20%
• Over Temperature Protection
• IP67 Case
• High Efficiency up to 84%
• SCP, Over Load Protection
• Leading or Trailing Edge Triac
Models
Single output
Model
Max
Output
Power
(W) ^①
Output
Voltage
Range (V)
No Load
Output
Voltage
(V max.)
Output
Current
(A)
AMEPR30D-5070AZ^{+Suffix ②}
35
36-50
64
0.7
AMEPR30D-4270AZ^{+Suffix ②}
29.4
32-42
54
0.7
AMEPR30D-3670AZ^{+Suffix ②}
25.2
24-36
52
0.7
AMEPR30D-36100AZ^{+Suffix ②}
36
24-36
52
1
AMEPR30D-24125AZ^{+Suffix ②}
30
12-24
34
1.25
AMEPR30D-24140AZ^{+Suffix ②}
33.6
12-24
34
1.4
AMEPR30D-15200AZ^{+Suffix ②}
30
8-15
23
2
① _{Exceeding the maximum output power will permanently damage the converter}
Input Voltage
(VAC/Hz)
90-264/47-440
90-264/47-440
90-264/47-440
90-264/47-440
90-264/47-440
90-264/47-440
90-264/47-440
Input
Voltage
(VDC)
120-370
120-370
120-370
120-370
120-370
120-370
120-370
Efficiency
(%)
85
84
83
84
82
83
81
②_{Model Nomenclature for Ordering:}
Add Suffix “-U”
Universal AC input 90-264VAC(no TRIAC dimming with this option)
Add Suffix “-110”
AC input 90-135VAC,
Add Suffix “-220”
AC input 180-264VAC
NOTE: All specifications in this datasheet are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at
rated output load unless otherwise specified.
Input Specifications
Parameters
Inrush current <2ms
Leakage current
AC current
Power Factor
External fuse
Start up time
Conditions
115VAC
230VAC
115VAC
230VAC
115VAC
230VAC
115VAC
230VAC
Typical
10
20
0.2
0.25
0.35
0.15
200
Maximum
0.9
0.9
250V/1A
Units
A
mA
A
ms
Output Specifications
Parameters
Conditions
Typical
Current accuracy
±5
Line regulation
LL-HL
±7
Load regulation
0-100% load
±5
Ripple & Noise ^③
20MHz Bandwidth
1-3
Hold-up time
1
Minimum Load Voltage
See the models table
③ _{Tested with 0.1µF (M/C) or (C/C) and 47µF (E/C) parallel capacitors at the end.}
Maximum
Units
%
%
%
V p-p
ms
www.aimtec.com
F 052.1e R3.G
Tel: [phone]
1 of 5
Toll free: + 1 888 9 AIMTEC
(924 6832)
North America only