AMEL05 Datasheet, PDF (1/2 Pages) AIMTEC – 5 watt encapsulated ac-dc converter

AMEL05 Series
5 watt encapsulated ac-dc converter
• ^{SWITCHING POWER MODULES FOR PCB MOUNTING}
• ^{LOW STANDBY POWER}
• ^{LOW RIPPLE & NOISE}
• ^{FULLY ENCAPSULATED PLASTIC CASE}
• ^{UNIVERSAL INPUT RANGE 90 ... 260VAC , 47 ... 440 HZ}
• ^{REGULATED OUTPUT}
• ^{HIGH EFFICIENCY}
• ^{CE MARKING}
ELECTRICAL SPECIFICATIONS
All specifications valid at nominal Input voltage, full load and +25°C after warm-up time unless otherwise stated.
Model No. (Single Output)
AMEL05-3.3S AMEL05-5S AMEL05-12S AMEL05-15S AMEL05-24S
Max output wattage (W)
4W
5W
5W
5W
5.5W
Voltage
90 ... 260 VAC or 120 ... 370 VDC
Frequency (Hz)
47 ... 440 Hz
Current (Full Load)
110mA max. (115 VAC) / 70mA max. (230 VAC)
Input
Inrush Current (<2ms)
10 A max. (115 VAC) / 20 A max. (230VAC)
Leakage Current
0.75mA max.
External Fuse (recommended)
1.5 A slow blow type
Voltage (VDC)
3.3V
5V
12V
15V
24V
Voltage Accuracy
±2%
Current (mA) max.
1250
1000
420
333
230
Line Regulation
±0.3% max.
Load Regulation (5%-100%)
±0.5% max.
Output Minimum Load
0%
Maximum Capacitive Load
470-23,000m F depending on model
Ripple & Noise
<0.5% Vout +50mV max (Vp-p)
Efficiency
65%
73%
75%
77%
78%
Hold-up Time
15 ms min.
Switching Frequency
125 kHz
Over Current Protection
Hiccup technique, auto-recovery
Protection Over Voltage Protection
Zener diode clamp
Short Circuit Protection
Hiccup mode, indefinite (automatic recovery)
Isolation Input-Output (VAC)
3000V
Operating Temperature
-25°C ... +71°C
Storage Temperature
-40°C ... +85°C
Environment Temperature Coefficient
0.02% / °C
Humidity
95% RH
MTBF
>340,000 h @ 25°C (MIL-HDBK-217F)
Dimension (L x W x H)
2.0 x 1.0 x 0.597 inches (50.8 x 25.4 x 15.16 mm)
Physical
Case Material
Weight
Plastic resin + Fiberglass (flammability to UL 94V-0)
30g
Cooling Method
Free air convection
Safety Agency Approvals
CE
EMC
EMI (Conducted & Radiated Emission)
EMS (Noise Immunity)
EN 55022
EN 55022
Specifications are subject to change without notification
VISIT US AT WWW.AIMTEC.CA
105
Continued on next page