AM6T Datasheet, PDF (1/3 Pages) List of Unclassifed Manufacturers – 6 watt dc-dc converters

AM6T Series
6 watt dc-dc converters
• ^{24 PIN DIP PACKAGE}
• ^{WIDE 2:1 INPUT RANGE}
• ^{HIGH EFFICIENCY UP TO 79%}
• ^{LOW PROFILE METAL PACKAGE}
• ^{INPUT/OUTPUT ISOLATION: 1500 & 3500VDC}
• ^{CONTINUOUS SHORT CIRCUIT PROTECTION}
• ^{OPERATING TEMPERATURE: -40°C ... +85°C}
• ^{PIN-COMPATIBLE WITH MULTIPLE MANUFACTURERS}
GENERAL DESCRIPTION
Our AM6T series is a family of cost effective 6W single
and dual output DC-DC converters. Input voltages of 12,
24 & 48 VDC with output voltages of 3.3, 5, 7.2, 9, 12, 15,
18, 24, ±3.3, ±5, ±7.2, ±9, ±12, ±15, ±18 & ±24VDC.
Full SMD-design and a 100% production test of parameters
ensures a high reliability in this product.
ELECTRICAL SPECIFICATIONS
Specification typical at +25°C, nominal input voltage, rated output current unless otherwise specified
Input Specifications:
Voltage
Filter
12VDC, 9-18VDC
24VDC, 18-36VDC
48VDC, 36-72VDC
p (Pi) Network
Isolation Specifications:
Rated Voltage (60 sec)
Resistance
Capacitance
1500 & 3500VDC
>1000MOhm
120pF, typ.
Environmental Specifications:
Operating temperature (ambient) -40°C ...+85°C
Storage temperature
-55ºC ... +125ºC
Case temperature
+100ºC, max.
Derating
None required
Humidity (non-condensing) Up to 90%
Cooling
Free-air Convection
General Specifications:
Efficiency
Switching Frequency
74% to 79%
250KHz, typ. 100% load
Output Specifications:
Voltage accuracy
±1%, max.
Voltage balance (dual outputs) ±1%
Ripple & Noise (at 20MHz BW) 60mVp-p, max.
Short circuit protection
Continuous
Short circuit restart
Automatic
Line voltage regulation
±0.5%, max.
Load voltage regulation
±0.5%, max.
Temperature coefficient
±0.02%/ºC, typ.
Physical Specifications:
Dimensions
Weight
Case material
31.75x20.32x10.16mm
1.25x0.80x0.40inches
19g
Nickel-Coated Copper
MTBF: > 1,002,000 hrs (MIL-HDBK-217F, Ground Benign, t=+25ºC)
Specifications are subject to change without notification
VISIT US AT WWW.AIMTEC.CA
65
Continued on next page