AM30KW-C Datasheet, PDF (1/3 Pages) AIMTEC – 30 watt dc-dc converters

AM30KW-C Series
30 watt dc-dc converters
• ^{POWER MODULES FOR PCB MOUNTING}
• ^{SIX-SIDED CONTINUOUS SHIELD}
• ^{4:1 WIDE INPUT RANGE}
• ^{HIGH EFFICIENCY}
• ^{STANDARD PACKAGE}
GENERAL DESCRIPTION
Our AM30KW-C series is a family of cost effective 30W single
and dual output DC-DC converters. These converters are shielded
on all six sides and encapsulated with a nickel-coated copper with
a non-conductive base and dimensions of 50.8x40.64x11.9mm.
The high performance features of our AM30KW-C components
include short circuit protection with hiccup auto recovery, tight line
regulation and a high efficiency operation coefficient up to 89%.
18 models operate from an input voltage of 24, 48VDC
producing output voltages of 1.8, 2.5, 3.3, 5, 12, 15 &
24VDC, ±5, ±12, ±15VDC . The normal operation is
specified over the full operating temperature range of -
25°C to +71°C with no derating required. Cooling is
done by free air convection.
ELECTRICAL SPECIFICATIONS
All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.
Input Specifications:
Voltage range
Filter
24 VDC, 10~40VDC
48 VDC, 18~75VDC
π (Pi) Network
Output Specifications:
Voltage accuracy
Ripple (1.8 & 5V)
Ripple (Others)
±2%, max.
100mVmax
±1%, max.
Isolation Specifications:
Rated voltage
Resistance
Capacitance
General Specifications:
Efficiency
Switching frequency
1500VDC
>1000 Mohms
1000pF
78% to 83%
300KHz, typ. 100% load
Noise
±1%, max.
Short circuit protection Hiccup, auto-recovery
Over current protection Works over 120% of rating
and recovers automatically
Over voltage protection Zener diode clamp protection
Line regulation (HL-LL) ±0.5%, typ.
Load regulation (10-100%)±1%, typ.,100mV, max -(1,8 - 5V)
Temperature coefficient ±0.02%/°C, typ.
Environmental Specifications:
Operating temperature
-25°C …+70°C
Storage temperature
-55°C …+105°C
Case temperature
+100°C, max.
Humidity (non-condensing) Up to 95%
Cooling
Free-air convection
Physical Specifications:
Dimensions
50.8 x 40.6 x 11.9mm,±0.5mm
2.0 x 1.6 x 0.47inches
Weight
58g
Case material
Nickel-Coated Copper with
Non-Conductive base,
six sides’ shielded
MTBF: > 550,000 hrs (MIL-HDBK-217F, Ground Benign, t=+25ºC)
Specifications are subject to change without notification
VISIT US AT WWW.AIMTEC.CA
Continued on next page