English
Language : 

AM2D Datasheet, PDF (1/3 Pages) AIMTEC – 2 watt dc-dc converters
AM2D Series
2 watt dc-dc converters
• 7 PIN SIP PACKAGE
• LOW RIPPLE & NOISE
• HIGH EFFICIENCY UP TO 85%
• INPUT/OUTPUT ISOLATION : 1000, 3000, 4000 & 5200VDC
• OPERATING TEMPERATURE: -40°C ... +85°C
• PIN-COMPATIBLE WITH MULTIPLE MANUFACTURERS
GENERAL DESCRIPTION
Our AM2D series is a family of cost effective 2W single,
dual, dual separate output isolated DC-DC converters.
These converters achieve low cost and ultra-miniature
SIP7 pin size without compromising performance and
reliability.
Two hundred sixteen models operate from input voltages of
5, 12 & 24VDC; producing output voltage levels of 3.3, 5,
7.2, 9, 12, 15, 18, 24, ±3.3, ±5, ±7.2, ±9, ±12, ±15, ±18 or
±24 VDC. Full SMD-design and a 100% production test of
parameters ensures a high reliability in this product.
ELECTRICAL SPECIFICATIONS
Specifications typical at +25°C, nominal input voltage, rated output current unless otherwise specified
Input Specifications:
Voltage range
Filter
±10%
Capacitor
General Specifications:
Efficiency
Switching frequency
72% to 85%
85KHz, typ. 100% load
Isolation Specifications:
Rated voltage (60 sec)
Resistance
Capacitance
1000VDC (all models)
3000, 4000 & 5200VDC
(single/dual output)
> 1000MOhm
60pF, typ.
Environmental Specifications:
Operating temperature (ambient) -40°C ... +85°C
Storage temperature
-55°C ... +125°C
Case temperature
+95°C, max.
Derating
None required
Humidity (non-condensing) Up to 90%
Cooling
Free-air Convection
Output Specifications:
Voltage accuracy
±5%, max.
Voltage balance (Dual Output) ±1%
Ripple & noise (at 20MHz BW) 75mVp-p, max.
Short circuit protection
Momentary
Line voltage regulation
±1.2% / 1.0% of Vin
Load voltage regulation
±8%, load=20~100%
Temperature coefficient
±0.02%/°C, typ.
Physical Specifications:
Dimensions
Weight
Case material
19.50x6.00x10.00mm
0.76x0.24x0.39inches
2 .5g
Non-conductive black
plastic
MTBF: > 688,000 hrs (MIL-HDBK-217F, Ground Benign, t=+25°C)
Specifications are subject to change without notification
OUTLINE DIMENSIONS & PIN CONNECTIONS
Pin
1000VDC
3000, 4000 & 5200VDC
Single
Dual
Dual Separate Single
Dual
1 +V Input +V Input +V Input +V Input +V Input
2 -V Input -V Input -V Input -V Input -V Input
4 -V Output -V Output +V1 Output Omitted Omitted
5 Omitted Common -V1 Output -V Output -V Output
6 +V Output +V Output +V2 Output Omitted Common
7 Omitted Omitted -V2 Output +V Output +V Output
33
Continued on next page
VISIT US AT WWW.AIMTEC.CA