AIC1702 Datasheet, PDF (15/15 Pages) Analog Intergrations Corporation – Load Regulation, typical - 2mV

 DFN 6L-2x2x0.75-0.65mm PACKAGE OUTLINE DRAWING
D
D2
4
AIC1702
6
PIN#1
TOP VIEW
3
e
1
BOTTOM VIEW
b
SIDE VIEW
SEATING PLANE
S
DFN 6L-2x2x0.75-0.65mm
Y
M
MILLIMETERS
B
O
L
MIN.
MAX.
A
0.70
0.80
A3
0.20 BSC
b
0.25
0.35
D
2.00 BSC
D2
1.20
1.60
E
2.00 BSC
E2
0.55
0.85
e
0.65 BSC
L
0.25
0.45
Note : 1. DIMENSION AND TOLERANCING CONFORM TO ASME Y14.5M-1994.
2.CONTROLLING DIMENSIONS：MILLIMETER，CONVERTED INCH
DIMENSION ARE NOT NECESSARILY EXACT.
3.DIMENSION b APPLIES TO METALLIZED TERMINAL AND IS
MEASURED BETWEEN 0.10 AND 0.25 mm FROM TERMINAL TIP.
Note:
Information provided by AIC is believed to be accurate and reliable. However, we cannot assume responsibility for use of any circuitry
other than circuitry entirely embodied in an AIC product; nor for any infringement of patents or other rights of third parties that may result
from its use. We reserve the right to change the circuitry and specifications without notice.
Life Support Policy: AIC does not authorize any AIC product for use in life support devices and/or systems. Life support devices or sys-
tems are devices or systems which, (I) are intended for surgical implant into the body or (ii) support or sustain life, and whose failure to
perform, when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a
significant injury to the user.
15