AIC1733_15 Datasheet, PDF (13/13 Pages) Analog Intergrations Corporation – 500mA, Low Dropout Linear Regulator with Shutdown

AIC1733
SOT-89-5 (unit: mm)
D
D1
e
e1
A
C
S
SOT-89-5
Y
M
MILLIMETERS
B
O
L
MIN.
MAX.
A
1.40
1.60
B
0.36
0.56
C
0.35
D
4.40
0.44
4.60
D1
1.50
E
2.29
1.83
2.60
e
1.50 BSC
e1
3.00 BSC
H
3.94
4.25
L
0.80
1.20
B
Note: 1. Refer to JEDEC TO-243AA.
2. Dimension "D" does not include mold flash, protrusions
or gate burrs. Mold flash, protrusion or gate burrs shall not
exceed 6 mil per side.
3. Dimension "E" does not include inter-lead flash or protrusions.
4. Controlling dimension is millimeter, converted inch
dimensions are not necessarily exact.
Note:
Information provided by AIC is believed to be accurate and reliable. However, we cannot assume responsibility for use of any
circuitry other than circuitry entirely embodied in an AIC product; nor for any infringement of patents or other rights of third parties
that may result from its use. We reserve the right to change the circuitry and specifications without notice.
Life Support Policy: AIC does not authorize any AIC product for use in life support devices and/or systems. Life support devices or
systems are devices or systems which, (I) are intended for surgical implant into the body or (ii) support or sustain life, and whose
failure to perform, when properly used in accordance with instructions for use provided in the labeling, can be reasonably
expected to result in a significant injury to the user.
13