AIC1187 Datasheet, PDF (13/13 Pages) Analog Intergrations Corporation – 1A Ultra Low Dropout Linear Regulator

z TO-252
E
b3
AIC1187
A
c2
E1
THERMAL PAD
A
A
e
SEE VIEW B
S
b
Y
M
B
WITH PLATING
O
L
A
BASE METAL
A1
SECTION A-A
b
b3
c
GAUGE PLANE
L
L1
VIEW B
c2
SEATING PLANE
D
D1
E
E1
e
H
Note: 1. Refer to JEDEC TO-252AA and AB.
L
2. Dimension "E" does not include mold flash, protrusions
L1
or gate burrs. Mold flash, protrusion or gate burrs shall not
exceed 6 mil per side .
L2
3. Dimension "D" does not include inter-lead flash or protrusions. ^L3
4. Controlling dimension is millimeter, converted inch
L4
dimensions are not necessarily exact.
θ
TO-252-3L
MILLIMETERS
MIN.
2.19
MAX.
2.38
0.00
0.13
0.64
0.89
4.95
5.46
0.46
0.61
0.46
0.89
5.33
6.22
4.60
6.00
6.35
6.73
3.90
5.46
2.28 BSC
9.40
10.41
1.40
1.78
2.67 REF
0.51 BSC
0.89
2.03
--
1.02
0°
8°
Note:
Information provided by AIC is believed to be accurate and reliable. However, we cannot assume responsibility for use of any circuitry
other than circuitry entirely embodied in an AIC product; nor for any infringement of patents or other rights of third parties that may result
from its use. We reserve the right to change the circuitry and specifications without notice.
Life Support Policy: AIC does not authorize any AIC product for use in life support devices and/or systems. Life support devices or
systems are devices or systems which, (I) are intended for surgical implant into the body or (ii) support or sustain life, and whose failure to
perform, when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a
significant injury to the user.
13