AIC2863 Datasheet, PDF (10/10 Pages) Analog Intergrations Corporation – 3A 23V Synchronous PWM/PSM Step-Down

 ^{PHYSICAL DIMENSIONS}
 SOP-8 Exposed Pad (Heat Sink)
D
EXPOSED THERMAL PAD(Heat Sink)
(BOTTOM CENTER OF PACKAGE)
D1
E1
AA
e
AIC2863
SEE VIEW B
B
WITH PLATING
L
VIEW B
BASE METAL
SECTION A-A
S
Y
M
B
O
L
GAUGE PLANE
A
SEATING PLANE
A1
B
C
D
D1
Note : 1. Refer to JEDEC MS-012E.
2. Dimension "D" does not include mold flash, protrusions
E
or gate burrs. Mold flash, protrusion or gate burrs shall not
E1
exceed 6 mil per side .
e
3. Dimension "E" does not include inter-lead flash or protrusions.
4. Controlling dimension is millimeter, converted inch
H
dimensions are not necessarily exact.
h
L
θ
Note:
SOP-8 Exposed Pad(Heat Sink)
MILLIMETERS
MIN.
1.35
MAX.
1.75
0.00
0.15
0.31
0.51
0.17
0.25
4.80
5.00
1.50
3.80
1.0
3.50
4.00
2.55
1.27 BSC
5.80
6.20
0.25
0.50
0.40
1.27
0°
8°
Information provided by AIC is believed to be accurate and reliable. However, we cannot assume responsibility for use of any circuitry other
than circuitry entirely embodied in an AIC product; nor for any infringement of patents or other rights of third parties that may result from its use.
We reserve the right to change the circuitry and specifications without notice.
Life Support Policy: AIC does not authorize any AIC product for use in life support devices and/or systems. Life support devices or systems are
devices or systems which, (I) are intended for surgical implant into the body or (ii) support or sustain life, and whose failure to perform, when
properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the
user.
10