AIC2362 Datasheet, PDF (10/10 Pages) Analog Intergrations Corporation – 2A 550k/1.1MHz Synchronous PWM/PSM

 SOP-8 Exposed Pad(Heat Sink)
D
EXPOSED THERMAL PAD(Heat Sink)
(BOTTOM CENTER OF PACKAGE)
D1
E1
AA
e
AIC2362
SEE VIEW B
B
WITH PLATING
L
VIEW B
BASE METAL
GAUGE PLANE
SEATING PLANE
SECTION A-A S
Y
M
B
O
L
A
A1
B
C
D
D1
Note : 1. Refer to JEDEC MS-012E.
E
2. Dimension "D" does not include mold flash, protrusions
E1
or gate burrs. Mold flash, protrusion or gate burrs shall not
e
exceed 6 mil per side .
3. Dimension "E" does not include inter-lead flash or protrusions.
H
4. Controlling dimension is millimeter, converted inch
h
dimensions are not necessarily exact.
L
θ
SOP-8 Exposed Pad(Heat Sink)
MILLIMETERS
MIN.
1.35
MAX.
1.75
0.00
0.15
0.31
0.51
0.17
0.25
4.80
5.00
1.50
3.80
1.0
3.50
4.00
2.55
1.27 BSC
5.80
6.20
0.25
0.50
0.40
1.27
0°
8°
Note:
Information provided by AIC is believed to be accurate and reliable. However, we cannot assume responsibility for use of any circuitry other than
circuitry entirely embodied in an AIC product; nor for any infringement of patents or other rights of third parties that may result from its use. We
reserve the right to change the circuitry and specifications without notice.
Life Support Policy: AIC does not authorize any AIC product for use in life support devices and/or systems. Life support devices or systems are
devices or systems which, (I) are intended for surgical implant into the body or (ii) support or sustain life, and whose failure to perform, when
properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the
user.
10