|
AIC3417 Datasheet, PDF (1/13 Pages) Analog Intergrations Corporation – 1.0A Synchronous Step-Up Converter | |||
|
AIC3417
1.0A Synchronous Step-Up Converter
ï® FEATURES
ï¬
ï¬ Output Voltage Range: from 2.5V to 5.5V.
ï¬ Up to 94% Efficiency
ï¬ Up to 1.0A Continuous Output Current
ï¬ Allow EN pin Floating
ï¬ Built-in current mode compensation
ï¬ Built-in Protection: Over Current, Over Voltage,
Over Temperature
ï¬ Optional Active High/Low EN pin
ï¬ Logic Controlled Shutdown: < 1μA
ï¬ Output Disconnect by Shutdown Function
ï¬ Built-in Soft Start
ï® APPLICATIONS
ï¬ Li-Ion Type Battery Operated Products
ï¬ Power Bank
ï¬ Handheld Devices
ï¬ Portable Products
ï® DESCRIPTION
The AIC3417 is a high efficiency, step-up DC/DC con-
verter with high light load efficiency. The true output
disconnect function eliminates inrush current and al-
lows Vout to go to zero during shutdown.
The AIC3417 is suited for high current boost application
such as battery backup supplies or wireless devices
powered by one Li-Ion battery or two Alkaline, Ni-Cd,
Ni-MH battery.
The device includes a 50mΩ N-Ch MOSFET switch
and a 60mΩ P-Ch MOSFET switch; it can provide high
efficiency at 1.0A continuous output current. High effi-
ciency is achieved at light load when PSM Mode oper-
ation is entered, where the ICâs quiescent current is
lower than 20μA on Vout.
The AIC3417 is available in the small 3mm x 3mm
DFN-10 and SOP-8(EP) package.
ï® TYPICAL APPLICATION CIRCUITS
Typical Application Circuit for DFN-10 Package
Analog Integrations Corporation
Si-Soft Research Center
3A1, 1 Li-Hsin 1st Rd., Science Park, Hsinchu 300, Taiwan, R.O.C.
TEL: 886-3-5772500
FAX: 886-3-5772510
DS-3417G-02 20150402
www.analog.com.tw
1
|
▷ |