AIC2565 Datasheet, PDF (1/13 Pages) Analog Intergrations Corporation – 23V 3A Step-Down DC/DC Converter

AIC2565
23V 3A Step-Down DC/DC Converter
 FEATURES
 3A Continuous Output Current
 Programmable Soft Start
 100mΩ Internal Power MOSFET Switch
 Stable with Low ESR Output Ceramic Capacitors
 Up to 95% Efficiency
 22µA Supply Current in Shutdown Mode
 Fixed 385KHz Frequency
 Thermal Shutdown
 Cycle by Cycle Over Current Protection
 Wide 4.75 to 23V Operating Input Range
 Output Adjustable from 1.22V to 16V
 Under Voltage Lockout
 APPLICATIONS
 Networking Products
 Distributed Power Systems
 Battery Charger
 Pre-Regulator for Linear Regulators.
 TYPICAL APPLICATIONS CIRCUIT
 ^DESCRIPTION
The AIC2565 is a high efficiency, step-down
DC/DC converter that builds in a high side
power MOSFET. It offers continuous 3A output
current over a very wide input voltage range
with excellent load and line regulation.
Well-performed current mode operation makes
fast transient response and feedback loop
stabilization easier.
The AIC2565 draws only 22A supply current in
shutdown mode. Current limit and thermal
shutdown function are also provided to prevent
damage. The AIC2565 is available in an 8-pin
SOP exposed pad package.
Analog Integrations Corporation
* Note: C7 is needed for high ESR output capacitor
Si-Soft Research Center
3A1, No.1, Li-Hsin Rd. I, Science Park, Hsinchu 300, Taiwan, R.O.C.
TEL: [phone]
FAX: [phone] www.analog.com.tw
DS-2565G-01 20110304
1