AIC1686 Datasheet, PDF (1/8 Pages) Analog Intergrations Corporation – Off-Line Power Supply Protection IC with Shunt Regulator

AIC1686
Off-Line Power Supply Protection IC with Shunt
Regulator
FEATURES
Overvoltage Protection for 3.3V, 5V, and 12V
Outputs.
Power Good Signal for 5V Output.
Remote ON/OFF Input.
Uncommitted Protection Input.
5V Regulator with 25mA Source Current.
2.5V Precision Shunt Regulator.
8V to 16V Operation.
Low Power Consumption.
APPLICATIONS
PC Off-Line Power Management.
DESCRIPTION
The AIC1686 is a supervisory and protection IC
intended for use in off-line, multiple output
power supplies. It consists of protection circuitry,
power good indicator, remote ON/OFF control,
and precision shunt regulator. The overvoltage
protection (OVP) function is for 3.3V, 5V, and
12V outputs. In addition, an uncommitted fault
detection input (PRIN) is available for use with
other protection functions, such as overcurrent,
undervoltage, and/or short-circuit protection of
outputs.
The shunt regulator has been included to
implement the feedback control for one of the
power supply’s outputs. The noniverting input
(EAI) is internally tied to a precision 2.5V
reference.
The power good circuit monitors the 5V output
and asserts, with a programmable delay, a TTL
compatible high logic level at its output after the
5V output reaches the regulation range. The
delay is programmed by a timing capacitor
connected to CPG pin of the IC. The power
good circuit sets its output low before the 5V
output goes out of regulation range. The remote
ON/OFF function enables the power supply to
be turned on and off from the secondary side by
a switch.
Analog Integrations Corporation 4F, 9, Industry E. 9th Rd, Science Based Industrial Park, Hsinchu Taiwan, ROC
DS-1686-00
TEL: [phone] FAX: [phone]
www.analog.com.tw
1