English
Language : 

E2500 Datasheet, PDF (3/10 Pages) Agere Systems – E2500-Type 2.5 Gbits/s Electroabsorption Moudlated Isolated Laser Module (EM-ILM) for Ultralong-Reach Applications
Data Sheet, Rev. 1
September 2001
E2500-Type 2.5 Gbits/s Electroabsorption Modulated
Isolated Laser Module (EM-ILM)
Absolute Maximum Ratings
Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. These are abso-
lute stress ratings only. Functional operation of the device is not implied at these or any other conditions in excess
of those given in the operations section of the data sheet. Exposure to absolute maximum ratings for extended
periods can adversely affect device reliability.
Parameter
Laser Diode Reverse Voltage
Laser Diode Forward Current
Optical Output Power
Modulator Reverse Voltage
Modulator Forward Voltage
Monitor Diode Reverse Voltage
Monitor Diode Forward Current
Storage Temperature Range
Operating Temperature Range
Conditions
Limit
Unit
CW
2
V
CW
150
mA
CW
10
mW
—
5
V
—
1
V
—
10
V
—
1
mA
—
–40 to +85
°C
—
0 to 70
°C
Characteristics
Table 2. Optical and Electrical Specifications
Parameter
Symbol
Conditions
Min Max Unit
Laser: Laser TOP (temperature of laser submount) = 15 °C to 35 °C, except where noted.
Threshold Current (BOL)
ITH
TLASER CHIP = TOP
5 35
Forward Voltage
VF
If = IOP @ TOP
— 2.0
Operating Current
IOP
TLASER CHIP = TOP
50 100
Threshold Power
PTH
TLASER CHIP = TOP
— 80
If = ITH, VM = 0 V
Fiber Output Power (peak)
PPK
TLASER CHIP = TOP
1—
VM = 0 V, If = IOP
Peak Wavelength (wavelength can be
λ0
specified to the ITU-T wavelength chan-
nels)
VM = 0 V
TLASER CHIP = TOP,
If = IOP
1530 1563
Side-mode Suppression Ratio
SMSR
VM = 0 V, If = IOP,TOP
30 —
Time Resolved Spectroscopy (chirp),
E2505 Series
TRSP-P
2.5 Gbits/s
VLOW = –1.5 V to –3.0 V
VHIGH = 0 V
If = IOP @ TOP
— 0.25
Time Resolved Spectroscopy (chirp),
E2502 Series
TRSP-P
2.5 Gbits/s
VLOW = –1.5 V to –3.0 V,
VHIGH = –0.3 V
If = IOP @ TOP
— 0.15
Dispersion Penalty
DP
2.5 Gbits/s
— 2.0
360 km (E2505)
600 km (E2502)
VLOW = –1.5 V to –3.0 V
VHIGH = 0 V (E2505), –0.3 V (E2502)
IF = IOP @ TOP
mA
V
mA
µW
dBm
nm
dB
Å
Å
dB
Agere Systems Inc.
3