RHD8540 Datasheet, PDF (4/8 Pages) Aeroflex Circuit Technology – RadHard-by-Design RHD8540 64-Channel Analog Multiplexer 32-Channel Kelvin Measurement Configured

DC ELECTRICAL PERFORMANCE CHARACTERISTICS 1/ (continued)
(Tc = -55°C to +125°C, +VCC = +5V - Unless otherwise specified)
Parameter
Symbol
Conditions
Min Max Units
High Input
Leakage Current
(CH0-CH63)
IINLK5
VIN = +5V, VEN = 70% VCC,
+25°C
-5
5
nA
Output and all unused MUX inputs under test = 0V _{+125°C -50}
50
nA
Low Input
Leakage Current
(CH0-CH63)
IINLK0
VIN = 0V, VEN = 70% VCC,
+25°C
-5
5
nA
Output and all unused MUX inputs under test =
+5V
+125°C ^-50
50
nA
Output Leakage Current
VOUT
(pins 25,26, 68 & 70)
CURRENTS
(pins 67 & 69)
IOUTLK
+25°C
-5
5
nA
VOUT = +5V, VEN = 70% VCC,
All inputs grounded except channel being tested.
3/, 4/
+125°C -50
50
nA
Switch ON Resistance
OUTPUTS
(pins 25,26, 68 & 70)
CURRENTS
(pins 67 & 69)
RDS(ON)
VIN = 0V, VEN = 30% VCC, IOUT = +1mA
-55°C
-
500

VIN = +2.5V, VEN = 30% VCC, IOUT = -0.6mA
VIN = +5V, VEN = 30% VCC, IOUT = -1mA
+25°C
-
750

2/, 3/, 5/, 6/
+125°C
-
1000

Notes:
1/ Measure inputs sequentially. Ground all unused inputs of the device under test. VA is the applied input voltage to the address lines A(0-3). VB is
the applied input voltage to the address lines B(0-3).
2/ VIN is the applied input voltage to the input channels (CH0-CH63).
3/ VEN is the applied input voltage to the enable lines EN (0-15), EN (16-31), EN (32-47) and EN (48-63).
4/ VOUT is the applied input voltage to the output lines OUTPUT1(0-15), OUTPUT2(16-31), OUTPUT3(32-47) and OUTPUT4(48-63),
CURRENT(32-47) and CURRENT(48-63).
5/ Negative current is the current flowing out of each of the MUX pins. Positive current is the current flowing into each MUX pin.
6/ The RHD8540 cannot be operated with analog inputs below 0 volts.
Parameter
Address to Output Delay
Enable to Output Delay
SWITCHING CHARACTERISTICS
(Tc = -55°C to +125°C, +VCC = +5V - Unless otherwise specified)
Symbol
Conditions
t_AHL
VOUT High to Low Transition
t_ALH
VOUT Low to High Transition
t_ONEN
VEN = 30% VCC (Enabled)
t_OFFEN
VEN = 70% VCC (Disabled)
Temp Min
-55°C 10
+25°C ¹⁰
+125°C 10
-55°C 10
+25°C ¹⁰
+125°C 10
-55°C 10
+25°C ¹⁰
+125°C 10
ALL
10
Max
150
150
200
150
150
200
150
150
200
200
Units
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
SCD8540 Rev A 4/1/15
4
Aeroflex Plainview