MUX8562 Datasheet, PDF (4/8 Pages) Aeroflex Circuit Technology – MUX8562 Dual 16-Channel Analog Multiplexer Module plus 5V, Radiation Tolerant

DC ELECTRICAL PERFORMANCE CHARACTERISTICS 1/ (continued)
(TC = -55°C to +125°C, +VEE = +5V, VREF = +5.0V - Unless otherwise specified)
Parameter
Positive Input Leakage
Current CH0-CH31
Negative Input Leakage
Current CH0-CH31
Positive Output
Leakage Current
OUTPUTS (pins 12,45)
Switch ON Resistance
OUTPUTS
(pins 12,45) 6/
Symbol
+ISOFFOUTPUT(ALL)
-ISOFFOUTPUT(ALL)
+IDOFFOUTPUT(ALL)
RDS(ON)(0-31)_A
Conditions
VIN = +5V, VEN = 4V, output and all unused MUX inputs
under test = 0V 2/, 3/
VIN = 0V, VEN = 4V, output and all unused MUX inputs
under test = +5V 2/, 3/
VOUT = +5V, VEN = 4V, and inputs grounded except
channel being tested. 3/, 4/
VIN = +5V, VEN = 0.8V, IOUT = -1mA 2/, 3/, 5/
Min Max Units
-100 +100 nA
-100 +100 nA
-50 +1500 nA
50 1000 Ω
Notes:
1/ Measure inputs sequentially. Ground all unused inputs of the device under test. VA is the applied input voltage to the address lines A(0-3). VB is
the applied input voltage to the address lines B(0-3).
2/ VIN is the applied input voltage to the input channels CH0-CH31.
3/ VEN is the applied input voltage to the enable line EN (0-15) and EN (16-31)
4/ VOUT is the applied input voltage to the output lines OUTPUT1 (0-15), OUTPUT2 (16-31)
5/ Negative current is the current flowing out of each of the MUX pins. Positive current is the current flowing into each MUX pin.
6/ The MUX8562 cannot be operated with analog inputs below 0 volts.
7/ Not tested, guaranteed to the specified limits.
SWITCHING CHARACTERISTICS
((TC = -55°C TO +125°C, +VEE = +5V, VREF = +5.0V - UNLESS OTHERWISE SPECIFIED))
Parameter
Switching Test MUX
Symbol
t_AHL
t_ALH
t_ONEN
t_OFFEN
Conditions
RL = 10KΩ, CL = 50pF
RL = 1KΩ, CL = 50pF
Min Max
100 ₇₀₀
100 700
100 ₇₀₀
100 700
Units
ns
ns
ns
ns
SCD8562 Rev A Preliminary 12/07/09
4
Aeroflex Plainview