English
Language : 

MUX8523 Datasheet, PDF (4/8 Pages) Aeroflex Circuit Technology – MUX8523 Dual 16-Channel Analog Multiplexer Module Radiation Tolerant and ESD Protected
DC ELECTRICAL PERFORMANCE CHARACTERISTICS 1/ (continued)
(TC = -55°C TO +125°C, +VEE = +15V, -VEE = -15V, VREF = +5.0V - UNLESS OTHERWISE SPECIFIED)
Parameter
Symbol
Conditions
Min Max Units
Positive Input
Leakage Current
(CH0-CH31)
+ISOFFOUTPUT(ALL)
VIN = +10V, VEN = 4V, output and all unused MUX inputs
under test = -10V 2/, 3/
-100
+700
nA
Negative Input
Leakage Current
(CH0-CH31)
-ISOFFOUTPUT(ALL)
VIN = -10V, VEN = 4V, output and all unused MUX inputs
under test = +10V 2/, 3/
-100 +700
nA
Positive Output
Leakage Current
OUTPUTS (pins 12,45)
+IDOFFOUTPUT(ALL)
VOUT = +10V, VEN = 4V, output and all unused MUX
inputs under test = -10V 3/, 4/
-100 +100 nA
Negative Output
Leakage Current
OUTPUTS (pins 12,45)
-IDOFFOUTPUT(ALL)
VOUT = -10V, VEN = 4V, output and all unused MUX
inputs under test = +10V 3/, 4/
-100 +100 nA
Input Clamped Voltage
(CH0-CH31)
Input Clamped Voltage
(CH0-CH31)
+VCLMP
-VCLMP
+25°C 18.0 23.0
V
+125°C 18.0 23.5
V
VEN = 4V, all unused MUX inputs under test
-55°C 17.5 22.5
V
are open. 3/
+25°C -23.0 -18.0 V
+125°C -23.5 -18.0 V
-55°C -22.5 -17.5 V
Switch ON Resistance
OUTPUTS (pins 12,45)
RDS(ON)(0-31)A
RDS(ON)(0-31)B
RDS(ON)(0-31)C
VIN = +15V, VEN = 0.8V, IOUT = -1mA 2/, 3/, 5/
VIN = +5V, VEN = 0.8V, IOUT = -1mA 2/, 3/, 5/
VIN = -5V, VEN = 0.8V, IOUT = +1mA 2/, 3/, 5/
500 3000 
500 3000 
500 3000 
Notes:
1/ Measure inputs sequentially. Ground all unused inputs of the device under test. VA is the applied input voltage to the address lines A(0-3). VB is
the applied input voltage to the address lines B(0-3)
2/ VIN is the applied input voltage to the input channels (CH0-CH31).
3/ VEN is the applied input voltage to the enable line EN (0-15) and EN (16-31).
4/ VOUT is the applied input voltage to the output lines OUTPUT1 (0-15), OUTPUT2 (16-31)
5/ Negative current is the current flowing out of each of the MUX pins. Positive current is the current flowing into each MUX pin.
6/ Not tested, guaranteed to the specified limits.
SWITCHING CHARACTERISTICS
(TC = -55°C TO +125°C, +VEE = +15V, -VEE = -15V, VREF = +5.0V -- UNLESS OTHERWISE SPECIFIED)
Parameter
Switching Test MUX
Symbol
tAHL
tALH
tONEN
tOFFEN
Conditions
RL = 10KCL = 50pF
RL = 10KCL = 50pF
Tc = +25°C, +125°C
Tc = -55°C
RL = 1KCL = 50pF
Min Max
10 1500
10 2000
10 5000
10 1500
10 1000
Units
ns
ns
ns
ns
ns
SCD8523 Rev B 5/17/11
4
Aeroflex Plainview