MUX8507 Datasheet, PDF (4/9 Pages) Aeroflex Circuit Technology – MUX8507 64-Channel Analog Multiplexer Module Radiation Tolerant

DC ELECTRICAL PERFORMANCE CHARACTERISTICS 1/ (continued)
(Tc = -55°C to +125°C, +VEE = +15.75V, -VEE = -15.75V, VREF = +5.0V, Unless otherwise specified)
Parameter
Symbol
Conditions
Min Max Units
Positive Input
Leakage Current
CH0-CH31
+ISOFFOUTPUT(0-31)
VIN = +10V, VEN = 4V, output and all unused
MUX inputs under test = -10V 2/, 3/, 8/
+25°C
-
-10
-100
+10
+100
nA
nA
Positive Input
Leakage Current
CH32-CH63
+ISOFFOUTPUT(32-63) _{VIN = +10V, VEN = 4V, output and all unused}
+25°C -20
+20
nA
+ISOFFCURRENT(32-63) ^{MUX inputs under test = -10V 2/, 3/, 8/}
-
-200 +200 nA
Negative Input
Leakage Current
CH0-CH31
-ISOFFOUTPUT(0-31)
VIN = -10V, VEN = 4V, output and all unused
MUX inputs under test = +10V 2/, 3/, 8/
+25°C ^-10
+10
nA
-
-100 +100 nA
Negative Input
Leakage Current
CH32-CH63
-ISOFFOUTPUT(32-63) _{VIN = -10V, VEN = 4V, output and all unused}
-ISOFFCURRENT(32-63) ^{MUX inputs under test = +10V 2/, 3/, 8/}
+25°C ^-20
+20
nA
-
-200 +200 nA
Output Leakage Current
OUTPUTS
(pins 25, 26, 68 & 70)
CURRENTS
(pins 67 & 69)
+IDOFFOUTPUT
+IDOFFCURRENT
VOUT = +10V, VEN = 4V, output and all unused MUX
inputs under test = -10V 3/, 4/, 8/
-100 +100 nA
-100 +100 nA
Output Leakage Current
OUTPUTS
-IDOFFOUTPUT
-100 +100 nA
(pins 25, 26, 68 & 70)
VOUT = -10V, VEN = 4V, output and all unused MUX inputs
under test = +10V 3/, 4/, 8/
CURRENTS
-IDOFFCURRENT
-100 +100 nA
(pins 67 & 69)
Switch ON Resistance
OUTPUTS
(pins 25, 26, 68 & 70)
RDS(ON)(0-63)_A
RDS(ON)(0-63)_B
VIN = +15.75V, VEN = 0.8V, IOUT = -1mA
2/, 3/, 5/
VIN = +5V, VEN = 0.8V, IOUT = -1mA
2/, 3/, 5/
500 3000

500 3000

RDS(ON)(0-63)_C
VIN = -5V, VEN = 0.8V, IOUT = +1mA
2/, 3/, 5/
500 3000

Switch ON Resistance
CURRENTS
(pins 67 & 69)
RDS(ON)(0-63)_A
RDS(ON)(0-63)_B
VIN = +15.75V, VEN = 0.8V, IOUT = -1mA
2/, 3/, 5/
VIN = +5V, VEN = 0.8V, IOUT = -1mA
2/, 3/, 5/
500 3000

500 3000

RDS(ON)(0-63)_C
VIN = -5V, VEN = 0.8V, IOUT = +1mA
2/, 3/, 5/
500 3000

Switch ON Resistance
OUTPUTS
(pins 25, 26, 68 & 70)
RDS(ON)(0-63)_A
RDS(ON)(0-63)_B
VIN = +11.4V, VEN = 0.8V, IOUT = -1mA
2/, 3/, 5/, 7/
VIN = +5V, VEN = 0.8V, IOUT = -1mA
2/, 3/, 5/, 7/
500 3200

500 3000

RDS(ON)(0-63)_C
VIN = -5V, VEN = 0.8V, IOUT = +1mA
2/, 3/, 5/, 7/
500 3000

Switch ON Resistance
CURRENTS
(pins 67 & 69)
RDS(ON)(32-63)_A
RDS(ON)(32-63)_B
VIN = +11.4V, VEN = 0.8V, IOUT = -1mA
2/, 3/, 5/, 7/
VIN = +5V, VEN = 0.8V, IOUT = -1mA
2/, 3/, 5/, 7/
500 3200

500 3000

RDS(ON)(32-63)_C
VIN = -5V, VEN = 0.8V, IOUT = +1mA
2/, 3/, 5/, 7/
500 3000

Notes:
1/ Measure inputs sequentially. Ground all unused inputs of the device under test. VA is the applied input voltage to the address lines A(0-3). VB is the
applied input voltage to the address lines B(0-3).
2/ VIN is the applied input voltage to the input channels CH0-CH63.
3/ VEN is the applied input voltage to the enable lines EN (0-15), EN (16-31), EN (32-47) and EN (48-63).
4/ VOUT is the applied input voltage to the output lines OUTPUT(0-15), OUTPUT(16-31), OUTPUT(32-47), OUTPUT(48-63), CURRENT(32-47) and
CURRENT(48-63).
5/ Negative current is the current flowing out of each of the MUX pins. Positive current is the current flowing into each MUX pin.
6/ Not tested, guaranteed to the specified limits.
7/ +VEE = +11.4 Vdc, -VEE = -11.4 Vdc and VREF = 5.0 V
8/ These parameters for Tc = -55°C are guaranteed by design, characterization, or correlation to other test parameters but not production tested.
SCD8507 Rev C 5/5/14
4
Aeroflex Plainview