CT25421111 Datasheet, PDF (1/17 Pages) Aeroflex Circuit Technology – CT 2542 / CT2543 Dual Redundant Remote Terminal FOR MIL-STD-1553B

CT 2542 / CT2543
Dual Redundant Remote Terminal
FOR MIL-STD-1553B
Features
• CT2542 Replaces DDC BUS-65142 and BUS-65144
• CT2543 Replaces DDC BUS-65143 and BUS-65145
• Functions as a Complete Remote Terminal Unit
• Supports 13 Mode Codes, Illegalization of Codes Allowed
• Transfers Data with DMA Type Handshaking
• Latched Outputs for Command Word and Word Count
• 14 Bit Built-ln-Test Word Register
• 4 Error Flag Outputs
• Advanced Low Power VLSI Technology
• DESC SMD# 5962–89798 Approved
CIRCUIT TECHNOLOGY
www.aeroflex.com
FLEX ^LAB
ISO
9001
CE _{R T I F I E D}
General Description
The CT2542 contains 2 transceivers, 2 encoder/decoders, bit processors and complete Remote Terminal (RT)
logic. The device is constructed using Aeroflex advanced VLSI custom chip and hybrid technology. It
functions as a complete dual redundant MIL-STD-1553B RT Unit supporting all 13 mode codes for dual
redundant operation. The CT2542 is a pin-for-pin functional equivalent of the DDC BUS-65142/144 and
performs parallel data transfers with a DMA type handshake. Multiple error flag outputs and host access to
many of the RT Status Word bits are just some of the features that make this part ideal for many RT
applications. The unit has an operating range of -55°C to + 125°C. Aeroflex is a MIL-PRF-38534 Certified
Manufacturer. See "Ordering Information" (last sheet) for CT2543.
DATA BUS A
DATA BUS B
DUAL
TRANSCEIVER
ENCODER/
DECODER
ENCODER/
DECODER
MIL-STD-1553B
PROTOCOL
AND
BIT
PROCESSING
LOGIC
I/O
INTERFACE
DB0-DB15
A0-A11
ERROR FLAG
TIMING FLAGS
STATUS BITS
Figure 1 – Functional Block Diagram
eroflex Circuit Technology – Data Bus Modules For The Future © SCDCT2542 REV E 8/23/00