DG34 Datasheet, PDF (3/3 Pages) American Electronic Components, inc – Industry standard style

DG34
pcb / industrial power relay
Overall Dimensions - Chassis Mount Relays
Fig. 4 Wiring Diagrams-Chassis Mount Relays
Fig. 5
*
QC Terminals
6.35 x 0.8 ± 0.03mm for contacts
2.8 x 0.8 ± 0.03mm for coil
Ordering codes
Type
D
G3 4
-
All dimensions in mm
Contact
Material
Contact
arrangement
Cover protec-
tion and
mounting
-
-
Coil code
Contact Material
10
- AgCdO (30A/20A)
30
- AgSnO₂ (40A/30A)
(RoHS Compliant)
Contact Arrangement
11
- SPDT ( 1 Changeover)
21
- SPST-NO (1 Normally open)
Cover Protection Category
1
- No cover (open frame). Not available with Terminal Option 6
3
- Covered, sealed. IP67
7
- Covered, dust cover
Terminations and mounting
0
- PCB + QC Terminals for contacts (open frame only)
5
- PCB only (no QC Terminals)
6
- Chassis mounting QC terminals for contacts and coil
see Table 1
Notes:
1) All parameters, unless otherwise specified, are measured at an ambient temperature of 23°C.
2) PCB Mounting Holes - the “ * ” hole is not needed for the SPST-NO version.
3) At an ambient temperature of 85°C, the maximum allowable coil voltage should be reduced to 72%.
4) Electrical life obtained at resistive or inductive load at 30A/15VDC with suitable arc suppression attached and with an operating frequency of 1 op/sec.

American Electronic Components Inc., 1101 Lafayette St. Elkhart, IN46516
Page 3 of 3
www.durakoolrelays.com Sales Department Tel: [phone]
Ref: DG34 041515 JHM
Specifications are subject to change without notice. E&OE.