DG27 Datasheet, PDF (2/2 Pages) American Electronic Components, inc – Cost effective

DG27
ultra miniature automotive pcb relay
Coil Data
Coil Voltage Code
Nominal Voltage Coil Resistance (Ω)
(V DC)
±10%
Must operate
voltage max.
(V DC)
Standard Coil (0.55W)
1006
6
64
3.5
1010
10
181
5.7
1012
12
254
6.9
* Above 85°C, maximum allowable voltage should be reduced to 72%
Ordering codes
Type
Contact material
Contact
arrangement
Cover protection
and mounting
DG
2
7-7
0
-3
5-
Contact material
70 -
AgSnOInO
80 -
AgNi0.15
Contact arrangement
11 -
2 x SPDT (2 x 1 C/O, 2 x 1 Form C)
12 -
2 x SPST-NO (2 x 1N/O, 2 x 1 Form A)
Cover protection category
2
-
Flux free
3
-
Fully sealed to IP67⁴
Connection mode
5
-
for PCB
Table 1
Must release
voltage min.
(V DC)
0.6
1.00
1.20
Max allowable
Overdrive *
V DC (23’C)
(Contact factory for 0.8W coil)
12.0
20.0
24.0
Coil code
see coil table 1
Overall Dimensions
Fig. 1
PCB Mounting Dimensions and Wiring
2 x SPDT
Fig. 2
2 x SPST-NO
All Dimensions in mm
Wiring Diagrams (Bottom View)
Notes:
1: All parameters, unless otherwise specified, are measured at ambient temperature of 23^ºC.
2: Maximum make current refers to inrush current of lamp load.
3: Electrical life obtained at resistive load at 20A, 13.5VDC on NO contacts, 6 ops/min.
4: For maximum electrical life, please remove the knock off nib of the sealed version.
Specifications are subject to change without notice. E&OE.
Page 2 of 2
www.aecsensors.com
Ref: DG27 122013JHM
Sales Department Tel: [phone]
Mounting Holes (Bottom View)