30C40 Datasheet, PDF (2/5 Pages) American Electronic Components, inc – Industry Standard Mounting

30C40
definite purpose contactor
General Specifications
Initial Operate Time
Release Time
Bounce Time
Arc Cover
Insulation System
Initial Dielectric Strength
between contacts and coil
between poles
between open contacts
Temperature Range
Unit Weight (approx.)
* Must use ring terminals
mS 20
mS 10 (typical)
mS ≤ 10
Standard
UL Class B 130°C
VAC 2200
VAC 2200 (includes shunt)
VAC 2200
°C -40 ... +65
1 pole 0.5 lb
2 pole 0.6 lb
3 pole 1.0 lb
4 pole 1.24 lb
Terminations
Coil Terminals
Table 2
1 pole
2 pole
3 pole
4 pole
0.250” QC + #6-32 screw
(dual 0.250” QC optional) -
per terminal
Power Terminals
1 pole _{#10-32 screw or #14-4 box}
2 pole _{lug + Dual 0.250” QC}
3 pole _{#10-32 screw or #14-4 box}
4 pole _{lug + Quad 0.250” QC}
Recommended Tightening
Torque
Wire size
#10-32 22 in.lbf (2.49 Nm)
box lug 40 in.lbf (4.52 Nm)
#10-32 16-8AWG*
box lug 14-4AWG
Ordering Codes
Type
Contact
material
Contact
arrangement
Cover protection and
terminations
30C40 - 102
-1
-
Coil code
Special options
-
Contact Ratings
40
- 40 FLA
Contact Material
10
- AgCdO (standard)
70
- AgSnOInO
Contact number & arrangement
21
- SPST-NO
22
- DPST-NO
23
- 3PST-NO
24
- 4PST-NO
T
Terminals
L
Terminals
Cover protection category
1
- IP00, no overall cover
Termination Codes (see drawings for full specifications)
1
- #10-32 combination philips screw with quad QC blades
2
- Same as 1 with sems screw and pressure plate
3
- #14-4AWG box lug with quad QC blades (box lug with quick connect)
4
- #14-4AWG box lug with dual QC blades (box lug with quick connect) (std for 40FLA)
5
- #10-32 combination phillips screw with dual QC blades (20-30FLA)
6
- #14-2AWG box lug with QC blades (standard for 50-60FLA)
7
- #14-1AWG box lug with QC blades (standard for 75-150FLA)
Reserved for Customer Specific Requirements
001
- Dual 0.25” QC blades for coil terminations
002
- 999 - optional customer specific number
Page 2 of 5
www.aecsensors.com
Ref: 30C40 101711JHM
Sales Department Tel: [phone]
see Tables 3 to 6