TLS Datasheet, PDF (1/3 Pages) American Electronic Components, inc – electronic tilt switches

TLS series
electronic tilt switches
Specifications
Contact number & arrangement
Max. switching voltage
Min. breaking capacity
Rated load (resistive - cos φ=1)
Max. switching power
• Wide trigger angle of up to 180 Degrees
• Factory Programmable hysteresis on reset angle
• Up to 5 Second delay on trigger and reset angle.
• Relay output switching up to 5A at 250VAC
• Two independent trigger and reset angles
• RoHS Compliant
2 x SPST-NO ( 2 x Form A), 2 x SPST-NC¹ ( 2 x Form B¹)
AC/DC 250VAC / 30VDC
W 50mW
AC1 5A/250VAC (Consult factory for higher currents)
DC1 5A/30VDC
1250VA / 150W
1) _{NC function requires the tilt switch to be powered at all times.}
Supply voltage
Current consumption
Trigger angle range
Reset range (minimum)
Resolution
Accuracy
Time Delay (factory set)
AC/DC 5 - 18VDC, 17 - 35VDC, 12 - 24VAC (see Ordering Codes, Page 2)
<150mA (both output relays energized)
180° (+/- 90° from horizontal) depending on part number
0.5° less than trigger angle
0.1°
0.5°
secs 0 to 5 seconds in 100 msec steps
Housing
Dimensions (approx.)
Weight
Ambient temperature
Sealing
Shock resistance
Vibration resistance
Polycarbonate (UL94-HB)
L x W x H 5.71” (over mounting flange) x 2.56” x 2.17” (145 x 65 x 55mm)
0.38lb (172g)
-40 to 70°C
IP65
10g
1.5mm DA 10...55Hz
Wiring Information
Cable length
Cable colors
12 inches (approx. 305mm)
Red & Black 5 - 12V supply (AC or DC)
Yellow & Blue Switch output 1 (volt free contact)
Brown & Orange Switch output 2 (volt free contact) - where fitted.
Page 1 of 3
www.aecsensors.com
Ref: TLS Series 012913JHM
Sales Department Tel: [phone]