TD4PX Datasheet, PDF (1/3 Pages) American Electronic Components, inc – electronic roll-over switch

TD4PX series
electronic roll-over switch
• Roll-over detection and fuel cut-off
• Wide trigger angle with 2° Hysteresis
• 3 sec delay on trigger and reset angle standard
• Non resettable - one shot optional
• Optional reset by external module or auto reset
after 90s
• Up to 1A output to drive up to 2 x mini-ISO relays
Specifications
Output
Output load
Short circuit protection
• _{Optional LED for trip status indication}

RoHS Compliant
PNP (see Fig. 3 for details)
DC 0.5A (max.)
Yes
Supply voltage
Current consumption
Polarity protection
Boot up time
DC 8 - 30V
≤ 25mA
Yes
<10ms
Housing
Dimensions (approx.)
Mounting
Connection
Weight
Ambient temperature
Humidity
Sealing
Shock resistance
Plastic injection moulded (PBTP)
L x W x H 40 x 40 x 25mm
M3 screws
M12 5 pin male connector (others to special order)
approx. 50g
-25°C to +85°C (storage and operating)
0 - 95% non-condensing
IEC60529 IP67
max. 10g
Measuring range
Centering function
Frequency response
Accuracy
Offset Error
Resolution
Temperature coefficient
detection angle ± 40° standard, other angles can be specified - see ordering code
pre-centered at 0°, range ±5°
(-3dB) 0 - 0.1Hz
±5°
0° (after factory zeroing)
0.09°
±0.04°/K
Page 1 of 3
www.aecsensors.com
Ref: TD4PX Series 011916JHM
Sales Department Tel: [phone]
Specifications are subject to change without notice. E&OE.