TD4PO Datasheet, PDF (1/3 Pages) American Electronic Components, inc – electronic tilt switches

TD4PO series
electronic tilt switches
Specifications
Output
Output load
Short circuit protection
• Omni-directional (horizontal plane)
• up to 2 x trigger angles
• PNP or NPN outputs
• 0.1A continuous output (max. 250mA 10s)
• _{M12 Male Connector or wire ended}
• _{Replaces TQG Series}
• RoHS Compliant
dual PNP or NPN (see Fig. 3 for details)
DC 150mA continuous, 250mA max.10 sec (protected against back EMF)
Yes (10s max)
Supply voltage
Current consumption
Polarity protection
Boot up time
DC 8 - 30V
≤ 25mA
Yes
<10ms
Housing
Dimensions (approx.)
Mounting
Connection
Weight
Ambient temperature
Relative humidity
Sealing
Shock resistance
Plastic injection moulded (PBTP) (Contact factory for other options)
L x W x H 40 x 40 x 25mm
M3 screws
M12 5 pin male connector (others to special order) or PUR cable
approx. 50g
-25°C to +85°C (storage and operating)
0 - 100%
IEC60529 IP67
max. 10g
Measuring range
Centering function
Frequency response
Accuracy
Offset Error
Resolution
Temperature coefficient
detection angles 2 x omni-directional switch points factory programmable
pre-centered at 0°, range ±5°
(-3dB) 0 - 0.5Hz
±0.4°
0° (after zeroing / centering)
0.09°
typical ±0.04°/K
Page 1 of 3
www.aecsensors.com
Ref: TD4PO Series 012016JHM
Sales Department Tel: [phone]
Specifications are subject to change without notice. E&OE.