T08-5220 Datasheet, PDF (1/1 Pages) American Electronic Components, inc – T08 Series

Part No: 5220
T08 Series
Tip Over Switch - Mercury
Features:
* Un-Insulated
* Form: NC/SPST/Vertical Mount as shown
* Angles Referenced from Horizontal
* Single Electrode
* Hermetically Sealed
* Small Package Size
* Narrow Included Angle
* High Current Capability
* Low Contact Resistance
* Long Life
0.670 Ref.
Dimensions in inches
Tilt switches “make” when the electrode is tilted below horizontal and
“break” when tilted above the horizontal. Total travel from “make” to
“break” is the “Maximum included angle” shown below. The
component to which the switch is attached must have a total tilt angle
greater than the “Maximum included angle” for proper operation.
12° / 17°
Typical Break Angle * :
Typical Remake Angle:
Switch Ratings:
Max Switching Voltage
Max Switching Current
Initial Contact Resistance (Max).
Stand Off Voltage (contact to contact)
Operating Temperature
Storage Temperature
Typical number of operations at specified load
G-Force Activation G-Level/Range
Dimensions:
Weight per 100pcs. Lbs / Kgs:
Body Length (with leads). Inches / Millimeters:
Maximum Diameter. Inches / Millimeters:
Materials:
Lead Wire Type
Lead wire length/skive/termination
Finish:
12° / 17°
7° / 14°
* Make/break angles are electrode + (above) / - (below) 0° horizontal
reference
240V 60Hz
1.7A / 120V 60Hz; 0.75A / 240VAC ; 1A / 12VDC
5 Ohms max (0.05A at 12VDC)
1240 V
-37º to 220ºF / -38º to 105ºC
-40º to 356ºF / -40º to 180ºC
10,000,000
N/A
0.77 / 0.35
0.682 / 17.3
0.612 / 15.2
N/A
N/A
Tin
© American Electronic Components Inc 2006
Specifications are subject to change without notice. E&OE.
American Electronic Components Inc.,
1101 Lafayette Street, Elkhart, Indiana. USA
Tel: [phone] Fax: [phone]
Email: [e-mail]
http://www.aecsensors.com
5220 11.20.08