English
Language : 

T08-20201 Datasheet, PDF (1/1 Pages) American Electronic Components, inc – Tilt Switch - Mercury
Part No: 20201 – T08 Series
Tilt Switch - Mercury
Features:
* Un-Insulated
* Form: NC/SPST/ Vertical Mount
as shown
* Angles Referenced from Vertical
* Omni-Directional
* Single Electrode
* Hermetically Sealed
* Small Package Size
* High Current Capability
* Low Contact Resistance
* Long Life
Dimensions in inches
Tilt switches “make” when the electrode is tilted below horizontal and
“break” when tilted above the horizontal. Total travel from “make” to
“break” is the “Maximum included angle” shown below. The
component to which the switch is attached must have a total tilt angle
greater than the “Maximum included angle” for proper operation.
Max Break Angle * :
Maximum included Angle:
Switch Ratings:
Max Switching Voltage
Max Switching Current
Initial Contact Resistance (Max).
Stand Off Voltage (contact to contact)
Operating Temperature
Storage Temperature
Typical number of operations at specified load
G-Force Activation G-Level/Range
Dimensions:
Weight per 100pcs. Lbs / Kgs:
Body Length (less leads). Inches / Millimeters:
Maximum Diameter. Inches / Millimeters:
Materials:
Lead Wire Type
Lead wire length/skive/termination
Finish:
55º
N/A
* from vertical 0º reference
220V 60Hz
1.7A / 120V 60Hz; 0.75A / 220VAC ; 1A / 12VDC
5 Ohms max (10mA at 5VDC)
1240 V
-38º to 220º F / -38º to 105º C
-40º to 356º F / -40º to 180º C
10,000,000
N/A
0.77 / 0.35
0.403 / 10.2
0.615 / 15.6
N/A
N/A
Tin
© American Electronic Components Inc 2006
Specifications are subject to change without notice. E&OE.
American Electronic Components Inc.,
1101 Lafayette Street, Elkhart, Indiana. USA
Tel: +1-574-295-6330 Fax: +1-574-293-8013
Email: sales@aecsensors.com
http://www.aecsensors.com
20201 210806