T03-1054 Datasheet, PDF (1/1 Pages) American Electronic Components, inc – Tip Over Switch – Mercury

Part No: T03-1054 T03 Series
Tip Over Switch – Mercury
Features:
* Meets UL Heat Rise Specification
* Un-Insulated
* Form: NC/SPST/Vertical Mount as shown
* Angles Referenced from vertical
* Dual Male Fastons w/ Mounting Boss
* Hermetically Sealed
* Small Package Size
* High Current Capability
* Low Contact Resistance
* Long Life
Shown in normally closed position.
Tip over switches “break” when the electrode is tilted from the vertical
and “make” when returned to the vertical.
Must Break Angle * :
Switch Ratings:
Max Switching Voltage:
Max Switching Current:
Initial Contact Resistance (Max):
Stand Off Voltage (contact to contact):
Operating Temperature:
Storage Temperature:
Typical number of operations at specified load:
G-Force Activation G-Level/Range:
Dimensions:
Weight per 100pcs. Lbs / Kgs:
Body Length (less leads). Inches / Millimeters:
Maximum Diameter. Inches / Millimeters:
Materials:
Termination Type:
Lead wire length/skive/termination:
Finish:
Drawing dimensions in inches.
25º to 45º in any direction
When switch is inverted there shall be no continuity
* from vertical 0º reference
240VAC
12.5A, 1500W/120V resistive, 1500W Tungsten,
1/6hp 120V
25 milli Ohms
1240VAC
-37º to 220º F / -38º to 105º C
-40º to 356º F / -40º to 180º C
3,000,000
N/A
3.20 / 1.45
0.87 / 22.1
0.94 / 24.0
¼” Male Quick Connect
N/A
Nickel
© American Electronic Components Inc 2006
Specifications are subject to change without notice. E&OE.
American Electronic Components Inc.,
1101 Lafayette Street, Elkhart, Indiana. USA
Tel: [phone] Fax: [phone]
Email: [e-mail]
http://www.aecsensors.com
T03-1054 110706