SDB1-80 Datasheet, PDF (1/2 Pages) American Electronic Components, inc – LED control input indicator

SDB1 - 60 - 80
DIN rail 60A & 80A solid-state relays
Output (load)
Load type
Load current
Load switching voltage
Maximum peak voltage
Minimum load current
Inrush Current (max.)
I²t
Switch type
On voltage drop
Leakage current off
● Enhanced load voltage - up to 660VAC with
high power dual SCR output.
● 4 ~ 32VDC or 90 ~ 250VAC control voltage.
● Single Phase, Zero cross-over switching.
● LED control input indicator.
● Integrated heatsink.
● RoHS Compliant.
E325835
SPST-NO (1 N/O) Resistive
60A, 80A
AC V_rms
AC V_pk
60 - 660V
900V
0.1A
10ms 60A: 720A / 80A: 1000A
60A: 2600A²s / 80A: 5000A²s
Zero Cross (Consult factory for Random)
V AC 1.6V
mA ≤ 10mA
Input (control)
Control voltage (rated)
Control current
Turn-on voltage (min)
Turn-on voltage (max)
Turn-off voltage
V DC Control: 4 - 32VDC / AC Control: 90 - 250VAC
mA < 20mA
V_min DC Control: 3.5VDC / AC Control: 80VAC
V_max DC Control: 35VDC / AC Control: 280VAC
V DC Control: 2VDC / AC Control: 40VAC
Insulation
Insulation resistance
Dielectric strength
≤ 500MΩ at 500VDC, 50%RH
V AC ≥ 2500V
General Data
Operating time (typical)
Release time (typical)
Dimensions
Weight
Ambient temperature
Relative Humidity
mS Approximately 1/2 cycle of load frequency + ≤1ms
mS Approximately 1/2 cycle of load frequency + ≤1ms
L x W x H 100 x 110 x 127mm
approx. 940g
storage -30 to 100°C (No icing or condensation)
operating -30 to 80°C (with derating). (No icing or condensation)
45 - 85% RH
Page 1 of 2
www.aecsensors.com Sales Department Tel: [phone] [phone]
Ref:SDB 1 60 80 111816FEW
Specifications are subject to change without notice. E&OE.