SDA1-30 Datasheet, PDF (1/2 Pages) American Electronic Components, inc – LED control input indicator

SDA1 - 20 - 25 - 30
DIN rail 20A, 25A & 30A solid-state relays
Output (load)
Load type
Load current
Load switching voltage
Maximum peak voltage
Minimum load current
Inrush Current (max.)
I²t
Switch type
On voltage drop
Leakage current off
Input (control)
Control voltage (rated)
Control current
Turn-on voltage (min)
Turn-on voltage (max)
Turn-off voltage
Insulation
Insulation resistance
Dielectric strength
General Data
Operating time (typical)
Release time (typical)
Dimensions
Weight
Ambient temperature
Relative Humidity
Page 1 of 2
www.aecsensors.com
Ref: SDA1 20 25 30 111716FEW DIN type SSR
● High load voltage - up to 480VAC
● 4 ~ 32VDC or 90 ~ 250VAC control voltage
● Single Phase, Zero cross-over switching
● LED control input indicator
● Integrated heatsink
● RoHS Compliant
E325835
SPST-NO (1 N/O) Resistive
20A, 25A, 30A
AC V_rms
AC V_pk
40 - 480V
900V
0.1A
10ms 20A: 240A / 25A: 300A / 30A: 380A
20A: 288A²s / 25A: 450A²s / 30A: 660A²s
Zero Cross (Consult factory for Random)
V AC 1.6V
mA ≤ 10mA
V DC Control: 4 - 32VDC / AC Control: 90 - 250VAC
mA < 20mA
V_min DC Control: 3.5VDC / AC Control: 80VAC
V_max DC Control: 35VDC / AC Control: 280VAC
V DC Control: 2VDC / AC Control: 40VAC
≤ 500MΩ at 500VDC, 50%RH
V AC ≥ 2500V
mS Approximately 1/2 cycle of load frequency + ≤1ms
mS Approximately 1/2 cycle of load frequency + ≤1ms
L x W x H 100 x 48 x 107mm
approx. 440g
storage -30 to 100°C (No icing or condensation)
operating -30 to 80°C (with derating). (No icing or condensation)
45 - 85% RH
Sales Department Tel: [phone]
Specifications are subject to change without notice. E&OE.