FCNA3710AW Datasheet, PDF (1/2 Pages) American Electronic Components, inc – Float Controls

Float Controls
sealed mechanical switch - narrow angle
Custom designed float switch for liquid
level control. Designed for use with liquid
level warning alarms, pilot duty control of
simplex or duplex systems, sump pumps
or any type of high/low operation. Avail-
able with standard power cords or custom
cords with quick-connect plugs, these
floats can serve as original equipment
components, retrofit, or as replacement
parts.
Tested to a water depth of 60 feet.
Ordering Codes
UL and CSA Recognized
U.L. # E87187 C.S.A. # LR64966
F
1
2
3
4
5
6
7
8
9
Float Color
Cord Termination
Cord Length
Code 1
Code 4
Code 6
Code 7
C Gray
1 120VAC Series Tap Plug*
1
0 10 feet
F Yellow
3 Plain Cut
2
0 20 feet
G Black
A Custom
3
0 30 feet
M Blue
Cord Type
A
A Custom length
D Red
Code 5
H Green
7 SJTO 16/2
8 SJTO 16/3
Mechanical Switch
Special Options
Code 2
Code 3 Operating angle & Switch Description
Code 8
Code 9
N
A 44.5° 13A, 1/2 HP, SPST-NO (Normally Open)
A
W includes Weight Kit 4438
N
B 44.5° 13A, 1/2 HP, SPST-NC (Normally Closed)
N
C 44.5° 13A, 1/2 HP, SPDT (Changeover)
Note: * = UL Listed. Only available with 10ft cable (Cord length Code 10)
Example: FCNA3710AW
Gray Float, SPST-NO mechanical switch, plain cut cord termination, SJTO 16/2 cord type, cord length 10 feet with weight kit.
Not all part number combinations are active. Set up charges may apply. Please contact factory for availability.
Contact factory for custom requirements or specific application information
American Electronic Components Inc., 1101 Lafayette Street, Elkhart, Indiana IN46516
Page 1 of 2
www.aecsensors.com
Ref: FSME NARROW 111513JHM
Sales Department Tel: [phone]