DTC4 Datasheet, PDF (1/3 Pages) American Electronic Components, inc – DIL Pitch PCB mounting

DTC4
subminiature pcb signal relay
• subminiature - only 14 x 9 x 5mm
• Up to 1A /24VDC rating
• DIL Pitch PCB mounting
• Surface Mount & Latching options
• RoHS Compliant
Contacts
Contact number & arrangement
Contact material
Max. switching voltage
Min. switching current / voltage
Rated load (resistive - cos φ=1)
Max. switching power
Initial resistance
Coil
Rated voltage
Must release voltage
Operating range of supply voltage
Rated power consumption
Insulation
Insulation resistance
Dielectric strength
General Data
Operating time (typical)
Release time (typical)
Electrical Life
Mechanical life
Dimensions
Weight
Ambient temperature
Shock resistance
Vibration resistance
DPDT ( 2 Changeover); 2 Form C
AgPd + Au plate (0.2um) on stationary contact
AC/DC 250VAC, 220VDC
0.01mA/10mVDC
AC1 0.5A, 125VAC
DC1 1A, 30VDC
62.5VA / 30W
≤ 50mΩ, max. at 0.1A/6VDC
DC 3...24V
≥0.1Un
See coil tables 1, 2 & 3
DC 0.14W / 0.10W (single coil latch) / 0.20W (twin coil latch)
≥1000MΩ at 500VDC, 50%RH
coil to contact 1000Vrms, 1min
contact to contact 1000Vrms, 1min
pole to pole 1000Vrms, 1min
mS ≤ 2
mS ≤1 / ≤2 (latching)
ops 2 x 10⁵ (1A/30VDC) / 2 x 10⁵ (0.5a/125VAC)
ops 1 x 10⁸
L x W x H 14 x 9 x 5mm / 14.2 x 9.3 x 5.3 (smt type)
≤ 1.5g
through hole -40... 70°C
smt -40... 85°C
Functional: 50g 11mS; Destructive: 100g
DA 3mm 10-55Hz
Page 1 of 3
www.aecsensors.com
Ref: DTC4 072512JHM
Sales Department Tel: [phone]