DTC2 Datasheet, PDF (1/3 Pages) American Electronic Components, inc – subminiature pcb signal relay

DTC2
subminiature pcb signal relay
• subminiature - only 21 x 10.x 11.6mm
• Up to 2A /30VDC rating
• DIL Pitch PCB mounting
• Cost effective
• RoHS Compliant
Contacts
Contact number & arrangement
DPDT ( 2 Changeover); 2 Form C
Contact material
Ag + Au plate (2um)
Max. switching voltage
AC/DC 120VAC, 30VDC
Min. switching current / voltage
1mA/1VDC
Rated load (resistive - cos φ=1)
AC1 1A, 120VAC
DC1 2A, 24VDC
Max. switching power
120VA / 48W
Initial resistance
≤ 100mΩ, max. at 0.1A/6VDC
Coil
Rated voltage
DC 3...48V
Must release voltage
≥0.1Un
Operating range of supply voltage
See coil table 1
Rated power consumption
DC 0.20W / 0.36W, 48V
Insulation
Insulation resistance
≥100MΩ at 500VDC, 50%RH
Dielectric strength
coil to contact 1000Vrms, 1min
contact to contact 500Vrms, 1min
General Data
Operating time (typical)
mS 8mS, 0.2W / 6mS, 0.36W
Release time (typical)
mS 4
Electrical Life (resistive 1800ops/hr)
ops 1 x 10⁵
Mechanical life (18000ops/hr)
ops 1 x 10⁷
Dimensions
L x W x H 21 x 10 x 11.6mm
Weight
≤ 4.8g
Ambient temperature
storage -30 to 80°C
operating -30 to 80°C
Shock resistance
Functional: 10g 11mS; Destructive: 100g
Vibration resistance
DA 1.5mm 10-55Hz
Page 1 of 3
www.aecsensors.com
Ref: DTC2 072116JHM
Sales Department Tel: [phone]
Specifications are subject to change without notice. E&OE.