DP6-1P Datasheet, PDF (1/2 Pages) American Electronic Components, inc – industrial relays

DP6-1P
industrial relays
• Relays DP6-1P - with changeover relay, rated load 6 A / 250 V (AC1)
• 35 mm DIN rail mount, EN 50022,
wires connection with screw terminals - 0.2...4 mm²
• Adapted for the co-operation with interconnection strip type DG20
• Equipped in LED green
• Recognitions, certificates, directives:
R
VDE
Contacts
Contact number & arrangement
Contact material
Max. switching voltage
Min. switching voltage
Rated load
Min. switching current
Max. inrush current
Rated current
Max. breaking capacity
Resistance - initially
Max. operating frequency
• at rated load
• no load
Input control ci rcuit
Rated voltage
Must release voltage
AC/DC
AC/DC
AC1
DC1
AC1
AC1
50/60 Hz AC
DC
AC/DC
Operating range of supply voltage
Must operate voltage
Input polarization current
Rated power consumption
AC
DC
Insulation
Insulation category
Insulation rated voltage
Rated surge voltage
Overvoltage category
Insulation pollution degree
Dielectric strength
• coil - contact
• contact - contact
General data
Operating time (typical value)
Release time (typical value)
Electrical life
• resistive AC1
• cos φ = 0,4
• resistive DC1
Rated torque for screw terminals
Mechanical life (cycles)
Dimensions (L x W x H)
Weight
Ambient temperature
• storage
• operating
Protection category
Environmental protection
1C/O
AgSnO2, AgSnO2/Au 3 um
250 V / 220 V
AgSnO2: 12 V
AgSnO2/Au 3 um: 100 mV
AgSnO2: 6 A / 250 V AC
AgSnO2/Au 3 um: 50 mA / 30 V AC
AgSnO2: 6 A / 24 V DC
AgSnO2/Au 3 um: 50 mA / 36 V DC
AgSnO2: 8 mA / 24 V
AgSnO2/Au 3 um: 2 mA / 24 V
AgSnO2: 15 A
AgSnO2/Au 3 um: 100 mA ❶
6A
AgSnO2: 1 500 VA
AgSnO2/Au 3 um: 1.5 VA
AgSnO2: ≤ 50 mΩ 100 mA, 24 V AgSnO2/Au 3 um: ≤ 25 mΩ 100 mA, 5 V
360 cycles/hour
72 000 cycles/hour
95...230 V
12-24-36 V
24-42-115-230 V AC: 50/60 Hz
AC: ≥ 0.2 Un
DC: ≥ 0.1 Un
AC: ≥ 0.5 Un ❷
see Table 1
AC and DC: ≤ 0.7 Un
AC: 0.6...0.85 Un ❷
DC: ≤ 0.8 Un ❷
AC: 8 mA < Ip < 10 mA 230 V AC ❷
0.35...2.2 VA
0.3...1.6 W
C250
400 V AC
4 000 V AC
III IEC 61810-5 (PN-IEC 664-1)
3
4 000 V AC
1 000 V AC
AC: 7 ms
AC: 15 ms
DC: 6 ms
DC: 10 ms
> 0.6 x 105
> 2 x 105
105
6 A, 250 V AC
2 A, 250 V AC
6 A, 30 V DC
≤ 0.3 Nm
> 2 x 107
80 x 6.2 x 93.8 mm
40 g
-40...+70 ^oC
-40...+55 ^oC
-40...+60 ^oC 12, 24 V DC
-40...+40 ^oC 230 V AC ❷ -40...+50 ^oC 230 V DC ❷
IP 20
RTI IEC 61810-7
Standard contact materials and coil rated voltages are marked with bold type.
❶ Max. inrush current 50 mA at voltage 30 V AC or 36 V DC
❷ Refer version PI6-1P-230VAC/DC-10 - relay with anti-disturbance circuit
Page 1 of 2
www.aecsensors.com
Sales Department Tel: [phone]