DEVR10 Datasheet, PDF (1/3 Pages) American Electronic Components, inc – No special installation required

DEVR10
Electric Vehicle Contactor
• High current and high voltage capability
• Compact structure - Low noise
• Magnetic arc blowout
• Max 900VDC @ 100A
• Reliable contacts in inert gas
• No special installation required
• RoHS Compliant
Contacts
Contact number & arrangement
SPST-NO (1NO)
Contact material
Max. switching voltage
AgSnO₂
900VDC
Min. switching voltage
12VDC
Min. switching current
Rated continuous current
100mA
100A * ¹ (voltage dependant)
Max. switching current
200A (3 mins) #8 AWG (8.4mm²) wire, at +40°C
Max. short circuit current
1250A (1/2 sine, 50/60Hz)
Voltage drop
≤80mV@100A)
Coil
Rated voltage
12 ~ 72VDC
Operating range of supply voltage
See coil data ‘Table 1’
Rated coil power consumption
5.5 ~ 6.0W
Insulation
Insulation resistance (Initial / End of Life)
100MΩ / 50MΩ at 500VDC
Dielectric strength
coil - contact 2,000Vrms / 4000VDC
contact - contact 5,600Vrms / 8000VDC
General Data
Operating time
mS ≤ 25ms. (includes bounce time - 5ms max)
Release time
mS ≤ 20ms.
Electrical Life
ops 50,000 @ 50A/400VDC : 6000 @ 100A/400VDC
Mechanical life
ops 1 x 10⁶
Dimensions
L x W x H 53.85 x 40 x 52.41mm (see drawings for detail)
Weight
190g ±2g
Ambient Temperature
operating / storage -40 to +85°C
Shock resistance
20G, 11ms ½ sine, peak
Vibration resistance
20G, sine, peak (55~2,000 Hz)
Noise (at 100mm)
70dB(a)
* Consult factory for higher current capabilities
1 _{Recommended wire - #8AWG (8.4mm}2₎
2 _{Failure to observe correct polarity for load terminal connections will result in degraded life.}
Page 1 of 3
American Electronic Components Inc., 1101 Lafayette St. Elkhart, IN46516
www.durakoolrelays.com Sales Department Tel: [phone] Toll: [phone]
Ref: DEVR10 121415JHM
Specifications are subject to change without notice. E&OE.