|
A1-008 Datasheet, PDF (1/1 Pages) American Electronic Components, inc – Tilt Switch - Mercury | |||
|
Part No: A1-008 - A1 Series
Tilt Switch - Mercury
Features:
* Insulated
* Form: NO/NC/SPST/Mount dependant
* Angles Referenced from Horizontal
* Single Electrode
* Hermetically Sealed
* Small Package Size
* Extremely Narrow Included Angle
* High Current Capability
* Low Contact Resistance
* Long Life
Drawing dimensions in inches.
Tilt switches âmakeâ when the electrode is tilted below horizontal and
âbreakâ when tilted above the horizontal. Total travel from âmakeâ to
âbreakâ is the âMaximum included angleâ shown below. The
component to which the switch is attached must have a total tilt angle
greater than the âMaximum included angleâ for proper operation.
Must Break Angle * :
Maximum included Angle:
Switch Ratings:
Max Switching Voltage
Max Switching Current
Initial Contact Resistance (Max).
Stand Off Voltage (contact to contact)
Operating Temperature
Storage Temperature
Typical number of operations at specified load
G-Force Activation G-Level/Range
Dimensions:
Weight per 100pcs. Lbs / Kgs:
Body Length (less leads). Inches / Millimeters:
Maximum width over bracket. Inches / Millimeters:
Materials:
Lead Wire Type
Lead wire length/skive/termination
Finish:
+ 0.7º
1.4º
* Make/break angles are electrode + (above) / -
(below) 0° horizontal reference
120V 60Hz
1 Amp max @ 120VAC, 1 million operations
50 milli Ohms
1500 VAC
-38º to 220ºF / -38º to 105ºC
-40º to 356ºF / -40º to 180º C
10,000,000
N/A
1.220 / 31.0
1.07 / 27.18
# 18AWG silicon grey
6â / ring terminals
Nylon 6/12 (33% glass filled)
© American Electronic Components Inc 2006
Specifications are subject to change without notice. E&OE.
American Electronic Components Inc.,
1101 Lafayette Street, Elkhart, Indiana. USA
Tel: +1-574-295-6330 Fax: +1-574-293-8013
Email: sales@aecsensors.com
http://www.aecsensors.com
A1 008 220806
|