English
Language : 

A-003 Datasheet, PDF (1/1 Pages) American Electronic Components, inc – Tilt Switch - Mercury
Part No: A1/2-003 – A1/2 Series
Tilt Switch - Mercury
Features:
* Insulated
* Form: NO/NC/SPST/Mount dependent
* Angles Referenced from Horizontal
* Single Electrode
* Hermetically Sealed
* Small Package Size
* Narrow Included Angle
* High Current Capability
* Low Contact Resistance
* Long Life
Drawing dimensions in inches.
Tilt switches “make” when the electrode is tilted below horizontal and
“break” when tilted above the horizontal. Total travel from “make” to
“break” is the “Maximum included angle” shown below. The
component to which the switch is attached must have a total tilt angle
greater than the “Maximum included angle” for proper operation.
Maximum included Angle* :
Switch Ratings:
Max Switching Voltage
Max Switching Current
Initial Contact Resistance (Max).
Stand Off Voltage (contact to contact)
(contact to ground)
Operating Temperature
Storage Temperature
Typical number of operations at specified load
G-Force Activation G-Level/Range
Dimensions:
Weight per 100pcs. Lbs / Kgs:
Body Length (less leads). Inches / Millimeters:
Maximum Diameter. Inches / Millimeters:
Materials:
Lead Wire Type
Lead wire length/skive/termination
Finish:
Clip:
15º
* Switching occurs when body axis is near horizontal
240V
120VAC / 1A: 240VAC / 0.4A, 120VDC /0.5A: 240VDC /
0.4A. Tungsten 120V / 60W
80 milli Ohms
1250V
1500V
-38º to 220º F / -38º to 105º C
-40º to 356º F / -40º to 180º C
10,000,000
N/A
0.99 / 0.45
0.96 / 24.4
0.38 / 9.5
#26AWG PVC Insulated
11 inches, spade terminals #6 screw
Case: PBT (30% Glass Filled)
Use P/N 0164 Mounting Clip
© American Electronic Components Inc 2006
Specifications are subject to change without notice. E&OE.
American Electronic Components Inc.,
1101 Lafayette Street, Elkhart, Indiana. USA
Tel: +1-574-295-6330 Fax: +1-574-293-8013
Email: sales@aecsensors.com
http://www.aecsensors.com
A1/2-003 200606