|
4929 Datasheet, PDF (1/1 Pages) American Electronic Components, inc – Tilt Switch - Mercury | |||
|
Part No: 4929 - A1/2S Series
Tilt Switch - Mercury
Features:
* Un-Insulated
* Form: NO/NC/SPST/Mount dependent
* Angles Referenced from Horizontal
* Single Electrode
* Hermetically Sealed
* Small Package Size
* Narrow Included Angle
* High Current Capability
* Low Contact Resistance
* Long Life
Drawing dimensions in inches.
Tilt switches âmakeâ when the electrode is tilted below horizontal and
âbreakâ when tilted above the horizontal. Total travel from âmakeâ to
âbreakâ is the âMaximum included angleâ shown below. The
component to which the switch is attached must have a total tilt angle
greater than the âMaximum included angleâ for proper operation.
Must Make / Break Angle * :
Maximum included Angle:
Switch Ratings:
Max Switching Voltage
Max Switching Current
Initial Contact Resistance (Max).
Stand Off Voltage (contact to contact)
Operating Temperature
Storage Temperature
Typical number of operations at specified load
G-Force Activation G-Level/Range
Dimensions:
Weight per 100pcs. Lbs / Kgs:
Body Length (less leads). Inches / Millimeters:
Maximum Diameter. Inches / Millimeters:
Materials:
Lead Wire Type
Lead wire length/skive/termination
Finish:
- 7º / + 7º
14º
* Make/break angles are electrode + (above) / - (below) 0° horizontal
reference
12V DC
0.5 A
2 Ohms Max @ 1 mA (-10º below horizontal)
1kV AC
-38º to 220º F / -38º to 105º C
-40º to 356º F / -40º to 180º C
10,000,000
N/A
0.33 / 0.15
0.25 / 9.9
0.27 / 6.7
N/A
N/A
Tin
© American Electronic Components Inc 2006
Specifications are subject to change without notice. E&OE.
American Electronic Components Inc.,
1101 Lafayette Street, Elkhart, Indiana. USA
Tel: +1-574-295-6330 Fax: +1-574-293-8013
Email: sales@aecsensors.com
http://www.aecsensors.com
4929 050606
|