20177 Datasheet, PDF (1/1 Pages) American Electronic Components, inc – Tilt Switch – Mercury - SPDT

Part No: 20177 – G5 Series
Tilt Switch – Mercury - SPDT
Features:
* Un-Insulated
* Form: NO/NC/SPDT/Mount dependent
* Angles Referenced from Horizontal
* Double Electrode
* Hermetically Sealed
* Small Package Size
* Narrow Included Angle
* High Current Capability
* Low Contact Resistance
* Long Life
Drawing dimensions in inches and (millimeters).
Tilt switches “make” when the electrode is tilted below horizontal and
“break” when tilted above the horizontal. Total travel from “make” to
“break” is the “Maximum included angle” shown below. The
component to which the switch is attached must have a total tilt angle
greater than the “Maximum included angle” for proper operation.
Must Make / Break Angle * :
Maximum included Angle:
Switch Ratings:
Max Switching Voltage
Max Switching Current
Initial Contact Resistance (Max).
Stand Off Voltage (contact to contact)
Operating Temperature
Storage Temperature
Typical number of operations at specified load
G-Force Activation G-Level/Range
Dimensions:
Weight per 100pcs. Lbs / Kgs:
Body Length (less leads). Inches / Millimeters:
Maximum Diameter. Inches / Millimeters:
Materials:
Lead Wire Type
Lead wire length/skive/termination
Finish:
Make to Break to Make 25º Max
* Make/break angles are electrode + (above) / - (below) 0° horizontal
reference
240V
120VAC / 7A, 240VAC / 5A: Tungsten 240V / 700W
3 milli Ohms
1500V
-38º to 220º F / -38º to 105º C
-40º to 356º F / -40º to 180º C
10,000,000
N/A
2.4 / 1.10
1.23 / 31.35
0.404 / 10.26
N/A
N/A
Tin plated
© American Electronic Components Inc 2006
Specifications are subject to change without notice. E&OE.
American Electronic Components Inc.,
1101 Lafayette Street, Elkhart, Indiana. USA
Tel: [phone] Fax: [phone]
Email: [e-mail]
http://www.aecsensors.com
20177 220806