|
20110 Datasheet, PDF (1/1 Pages) American Electronic Components, inc – Tip Over Switch - Mercury | |||
|
Part No: 20110 - A1/2 Series
Tip Over Switch - Mercury
Features:
* Un-Insulated
* Form: NO/SPST/Vertical Mount as shown
* Angles Referenced from Vertical
* Side Pin 2nd Electrode
* Omni-Directional
* Hermetically Sealed
* Small Package Size
* Long Life
Tilt switches âmakeâ when the electrode is tilted below horizontal and
âbreakâ when tilted above the horizontal. Total travel from âmakeâ to
âbreakâ is the âMaximum included angleâ shown below. The
component to which the switch is attached must have a total tilt angle
greater than the âMaximum included angleâ for proper operation.
Must Make / Break Angle :
Maximum included Angle:
Drawing dimensions in inches and (millimeters).
Must make between 45º and 75º from vertical
Load dependent
Switch Ratings:
Max Switching Voltage
Max Switching Current
Initial Contact Resistance (Max).
Stand Off Voltage (contact to contact)
Operating Temperature
Storage Temperature
Typical number of operations at specified load
G-Force Activation G-Level/Range
Dimensions:
Weight per 100pcs. Lbs / Kgs:
Body Length (less leads). Inches / millimeters:
Maximum Diameter. Inches / millimeters:
Materials:
Lead Wire Type
Lead wire length/skive/termination
Finish:
12V DC
10mA
10 Ohms
1kV AC
-38º to 220ºF / -38º to 105ºC
-40º to 356ºF / -40º to 180º C
10,000,000
N/A
0.33 / .015
0.39 / 9.91
0.31 / 7.9
N/A
N/A
Tin
© American Electronic Components Inc 2006
Specifications are subject to change without notice. E&OE.
American Electronic Components Inc.,
1101 Lafayette Street, Elkhart, Indiana. USA
Tel: +1-574-295-6330 Fax: +1-574-293-8013
Email: sales@aecsensors.com
http://www.aecsensors.com
20110 220806
|