|
UNOP-1624D Datasheet, PDF (1/1 Pages) Advantech Co., Ltd. – 4-port Isolated RS-232/422/485 with IRIG B | |||
|
UNOP-1628D/1618D
UNOP-1624D
UNOP-1514C
NEW
NEW
8-port RS-232/422/485 with and
without port-to-port Isolation
4-port Isolated RS-232/422/485
with IRIG B
4-port Fiber Optic LAN Card
NEW
UNOP-1628D/1618D
RoHS
COMPLIANT
2002/95/EC
UNOP-1624D
RoHS
COMPLIANT
2002/95/EC
UNOP-1514C
RoHS
COMPLIANT
2002/95/EC
Specifications
General
ÂÂ Connector
ÂÂ Dimension
ÂÂ Power Consumption
ÂÂ Certification
Communication
ÂÂ IRQ
ÂÂ COM Ports
ÂÂ Data Bits
ÂÂ Stop Bits
ÂÂ Parity
ÂÂ Baud-rate (bps)
ÂÂ Data Signals
Protection
ÂÂ Isolation Protection
Environment
ÂÂ Operating Temp.
ÂÂ Operating Humidity
ÂÂ Storage Humidity
120-pin connector for UNO-
4673A/PCI
5.3" x 6.0" (136 x 150 mm)
5V ± 5% @ 620mA typical
3.3V ± 5% @ 75mA typical
CE/FCC
All COM ports use the same
IRQ assigned by PCI Bus
8 x RS-232/422/485 ports
5, 6, 7, 8
1, 1.5, 2
None, Even, Odd
RS-232: 50 ~ 115.2 kbps
RS-422/485: 50 ~ 921.6 kbps
(Max.)
TxD, RxD, RTS, CTS,
RI,DSR,DTR,DCD,GND for
RS-232
Data+, Data-, GND for RS-485
Tx+, Tx-, Rx+, Rx- for RS-422
2000 VDC (UNOP-1628D)
-20 ~ 70°C (-4 ~158°F)
10 ~ 90% RH
non-condensing (refer to IEC
60068-2-3)
5 ~ 95% RH non-condensing
(refer to IEC 60068-2-3)
Ordering Information
ÂÂ UNOP-1618D-AE
ÂÂ UNOP-1628D-AE
8-port RS-232/422/485 for
UNO-4673A
8-port Iso.
RS-232/422/485 for
UNO-4673A
Specifications
Specifications
General
ÂÂ Connector
ÂÂ Dimension
ÂÂ Power Consumption
ÂÂ Certification
120-pin connector for
UNO-4673A/PCI
5.3" x 6.0" (136 x 150 mm)
5V ± 5% @ 500mA typical.
3.3V ± 5% @ 180mA typical.
CE/FCC
Communication
ÂÂ IRQ
ÂÂ COM Ports
ÂÂ Baud rate (bps)
ÂÂ Data Signals
All COM ports use the same
IRQ assigned by PCI Bus
4 x RS-232/422/485 ports
RS-232: 50 ~ 115.2 kbps
RS-422/485: 50 ~ 921.6 kbps
(Max.)
TxD, RxD, RTS, CTS, RI,
DSR, DTR, DCD, GND for
RS-232Data+, Data-, GND for
RS-485Tx+, Tx-, Rx+, Rx- for
RS-422
IRIG Time Code Input
ÂÂ IRIG Interface
ÂÂ ST Multi-Mode
ÂÂ Input Signal
ÂÂ Supported Formats
Male 9-pole D-Sub connector
(COM4 or IRIG-B)
Fiber connector
Female BNC
RS-422 input signal isolated by
optocoupler Optical signal @
820nm; TTL
IRIG-B according to IRIG
STANDARD 200-04, 200-98
IRIG Time Code Output
ÂÂ IRIG Interface
Male 9-pole D-Sub connector
(COM4 or IRIG-B)
ÂÂ Output Signal
Female BNC
RS-422 output signal; TTL
IRIG Time Code Decoding
ÂÂ Message syntax
YYYYQQQHHMMSS
(yr, d, h, min, sec)
ÂÂ Resolution of the time 1s
ÂÂ Status info
1 status LED for indication
Protection
ÂÂ Isolation Protection
2000 VDC
Environment
ÂÂ Operating Temp.
ÂÂ Operating Humidity
ÂÂ Storage Humidity
-20 ~ 70°C (-4 ~158°F)
10 ~ 90% RH non-condensing
(refer to IEC 60068-2-3)
5 ~ 95% RH non-condensing
(refer to IEC 60068-2-3)
General
ÂÂ Connector
ÂÂ Dimension
ÂÂ Power Consumption
ÂÂ Certification
Fiber Optic LAN
ÂÂ Standard
ÂÂ Transmission
Distance
ÂÂ Wavelength
ÂÂ Transmission Speed
Interface
ÂÂ Connectors
ÂÂ LED Indicators
ÂÂ Power Consumption
Environment
ÂÂ Operating Temp.
ÂÂ Operating Humidity
ÂÂ Storage Humidity
120-pin connector for UNO-
4673A/PCI
5.3" x 6.0" (136 x 150 mm)
5V ± 5% @ 2000 (at least) mA
CE/FCC
IEEE 802.3, 802.3u, 802.3x
LAN 100Base-FX
Up to 2 km
1300 nm
Up to 100 Mbps
4 x SC type Multi-mode
Fiber Optic connector
Active, Link (100Base-FX)
Max. 10W
-20 ~ 70°C (-4 ~158°F)
10 ~ 90% RH noncondensing
(refer to IEC 60068-2-3)
5 ~ 95% RH
non-condensing
(refer to IEC 60068-2-3)
Ordering Information
ÂÂ UNOP-1514C-AE
4-port Fiber Optic LAN Card for
UNO-4673A
Ordering Information
ÂÂ UNOP-1624D-AE
4-port Iso.
RS-232/422/485 and IRIG B for
UNO-4673A
Online Download www.advantech.com/products
|