UNO-2483G_15 Datasheet, PDF (1/2 Pages) Advantech Co., Ltd. – Intel® Core™ i7/i3/Celeron Regular-Size Automation Computer w/ 4 x GbE,3 x mPCIe, HDMI/VGA

UNO-2483G
Intel^® Core™ i7/i3/Celeron Regular-Size
Automation Computer w/ 4 x GbE,
3 x mPCIe, HDMI/VGA
NEW
Features
ƒƒ 4th Generation Intel^® Core™ i7/i3/Celeron Processors up to 1.9GHz with
4GB/8GB DDR3L Memory
ƒƒ 4 x GbE, 4 x USB 2.0/3.0, 2 x RS-232, 2 x RS-422/485, 1 x VGA, 1 x HDMI,
Audio
ƒƒ Comprehensive Palm, Small, Regular-size form-factor
ƒƒ Compact with Fanless Design
ƒƒ Rubber Stopper Design with Captive Screw
ƒƒ Dual HDD/SSD support with RAID 0/1 in regular-size
ƒƒ Diverse system I/O and Isolated Digital I/O by iDoor Technology
ƒƒ 3G/GPS/GPRS/Wi-Fi Communication by iDoor Technology
ƒƒ Supports MRAM by iDoor Technology
ƒƒ Chassis Grounding Protection
ƒƒ LAN Redundancy (Teaming)
ƒƒ Fault-Protected RS-485 Transceivers With Extended Common-Mode Range
Introduction
RoHS
COMPLIANT
2002/95/EC
Advantech’s UNO-2000 series of Embedded Automation Computers are Fanless with highly ruggedised with an embedded operating system (Windows CE, Windows Embedded 7/8,
Linux-Embedded). It also includes iDoor technology which supports automation feature extensions such as industry fieldbus communication, Wi-Fi/3G, Digital I/O, including Palm,
Small, and Regular-size Form-Factors with indicated market segments in terms of entry, value and performance product positioning. Both entry and value Embedded Automation
Computers feature specific functions and they are suitable for data gateway, concentrator and data server applications. The performance model can shorten your development time
and offer multiple networking interfaces to fulfill a diverse range of requirements.
Specifications
General
ƒƒ Certification
CE, FCC, UL, CCC, BSMI
ƒƒ Dimensions ( W x D x H ) 252 x 149 x 62 mm (9.9" x 5.9" x 2.4")
ƒƒ Form Factor
Regular Size
ƒƒ Enclosure
Aluminum Housing
ƒƒ Mounting
Stand, Wall, VESA (Optional)
ƒƒ Weight (Net)
1.6kg (3.5lbs)
ƒƒ Power Requirement
24VDC ± 20%
ƒƒ Power Consumption 28W (Typical), 72W (Max)
ƒƒ OS Support
Microsoft^® Windows 7/8
System Hardware
ƒƒ BIOS
ƒƒ Watchdog Timer
ƒƒ Processor
ƒƒ System Chip
ƒƒ Memory
ƒƒ Graphics Engine
ƒƒ Ethernet
ƒƒ LED Indicators
ƒƒ Storage
ƒƒ Expansion
AMI UEFI 128Mbit Flash BIOS
Programmable 256 levels timer interval, from 1 to 255 sec
4th Gen Intel^® Core™ i7-4650U ULT 1.7 GHz Dual Core, 4MB L2
4th Gen Intel^® Core™ i3-4010U ULT 1.7 GHz Dual Core, 3MB L2
4th Gen Intel^® Celeron^® 2980U ULT 1.6 GHz Dual Core, 2MB L2
Integrated Intel 8 Series Chipset
On-board 4GB DDR3L 1600 MHz for UNO-2483G-4C3AE
On-board 8GB DDR3L 1600 MHz for UNO-2483G-434AE and
UNO-2483G-474AE
Intel^® HD Graphics 5000/4400
Intel^® i210-IT GbE, 802.1Qav, IEEE1588/802.1AS, 802.3az
Intel^® i218-LM GbE, Intel^® AMT, IEEE1588/802.1AS, 802.3az
LEDs for Power, battery, LAN (Active, Status), Tx/Rx and HDD
One mSATA
Two drive bays for SATA 2.5" HDD (Compatible with 9.5mm
height HDD)
CFast drive by iDoor Technology (Optional)
2 x Full-size mPCIe slot, mPCIe 2.0
I/O Interfaces
ƒƒ Serial Ports
ƒƒ LAN Ports
ƒƒ USB Ports
ƒƒ Displays
ƒƒ Audio
ƒƒ Power Connector
2 x RS-232, DB9, 50~115.2kbps
2 x RS-422/485, DB9, auto flow control, 50~115.2kbps
4 x RJ45, 10/100/1000 Mbps IEEE 802.3u 1000Base-T Fast
Ethernet
4 x USB Ports (2 x USB 2.0, 2 x USB 3.0 compliant )
1 x VGA, supports 1920 x 1200 @ 60Hz 24bpp
1 x HDMI 1.4a, supports 3200 x 2000 @ 60Hz 24bpp
Line-In, Line-Out
1 x 3 Pins, Terminal Block
Environment
ƒƒ Operating Temperature
ƒƒ Storage Temperature
ƒƒ Relative Humidity
ƒƒ Shock Protection
ƒƒ Vibration Protection
ƒƒ Ingress Protection
- 20 ~ 60°C (-4 ~ 140°F) @ 5 ~ 85% RH with 0.7m/s
airflow
- 40 ~ 85°C ( -40 ~ 185°F)
10 ~ 95% RH @ 40°C, non-condensing
Operating, IEC 60068-2-27, 50G, half sine, 11ms
Operating, IEC 60068-2-64, 2Grms, random, 5 ~ 500Hz,
1hr/axis (mSATA)
Operating, IEC 60068-2-64, 0.7Grms, random, 5 ~ 500Hz,
1hr/axis (HDD)
IP40
Application Software
Version : V2.1 or above
An innovative remote device management software, allowing
efficient remote monitoring, quick recovery & backup, and
real-time remote configuration, to create a more intelligent and
interconnected embedded computing solution.
Version : V7.1 or above
WebAccess, as the core of Advantech’s IoT solution, is full web
browser-based software package for HMI and SCADA software.
All HMI and SCADA software features including: Animated
Graphics Displays, Real-time Data, Control, Trends, Alarms
and Logs, are available in a standard web browser. WebAccess
is built around the latest internet technologies. With its open
architecture, vertical domain applications can easily be
integrated.
Version : V2.0.3.8 or above
Panel Express, a windows based HMI mini SCADA, realizes
the cross platform flexibility offered by WebOP Designer to
switch hardware for the consideration of cost and performance
become an easy job. Panel Express software provides the best
economic and express solution for data intensive high-end
HMI applications.
Version : V2.0.3.8 or above
An easy to use integrated development tool featuring solution-
oriented screen objects, high-end graphics, Windows fonts for
multi-language applications. WebOP runtime, a part of WebOP
Designer, guarantees reliability and performance because of the
minimum system overhead, high communication data rates,
and sub-second screen switching.
Embedded Automation Computers
All product specifications are subject to change without notice
Last updated : 5-May-2015