UNO-1483G_15 Datasheet, PDF (1/2 Pages) Advantech Co., Ltd. – Intel® Core™ i3 Regular-Size Control DIN-Rail PC w/ 4 x GbE, 3 x mPCIe,1 PCIe, DP/VGA, 8 DI/O

UNO-1483G
Intel^® Core™ i3 Regular-Size Control
DIN-Rail PC w/ 4 x GbE, 3 x mPCIe,
1 PCIe, DP/VGA, 8 DI/O
NEW
Features
ƒƒ 4th Generation Intel^® Core™ i3 Processors up to 1.7GHz with 8GB DDR3L
Memory
ƒƒ 4 x GbE, 4 x USB 2.0/3.0, 1 x RS-232, 2 x RS-422/485, 1 x VGA, 1 x DP,
Audio
ƒƒ Compact with Fanless Design
ƒƒ Supports PCIe card, PoE iDoor module and Digital I/O for Machine Motion/
Vision application
ƒƒ Dual Power Input and Remote Power Button for reducing power down time
and remote power control
ƒƒ 4G/3G/GPS/GPRS/Wi-Fi Communication by iDoor Technology
ƒƒ Supports MRAM by iDoor Technology
ƒƒ Chassis Grounding Protection
ƒƒ Hot-Swap RTC battery with easily access at top side
ƒƒ Supports Fieldbus Protocol by iDoor Technology
Introduction
RoHS
COMPLIANT
2002/95/EC
The UNO-1483G is an Intel 4th generation Core i3 DIN-Rail controller. This controller featured with dual power input that shorten the down time to enhance operation excellence. The
general purpose input/output ports also help machine builder integrate direct control of start/stop inspection and indicate inspection results. UNO-1483G also equipped with PCIe
slot and Advantech iDoor technology that extend this product to motion controller, like motion control card, or isolation control unit from iDoor modules. In companion these features,
UNO-1483G featured with 4 gigabyte LAN, 2 USB 3.0, 3 COM, DP, VGA can support essential link for upstream and downstream, for example, PoE connected to IP camera from iDoor.
Specifications
General
ƒƒ Certification
ƒƒ Dimensions (W x D x H)
ƒƒ Form Factor
ƒƒ Enclosure
ƒƒ Mounting
ƒƒ Weight (Net)
ƒƒ Power Requirement
ƒƒ Power Consumption
ƒƒ OS Support
System Hardware
ƒƒ BIOS
ƒƒ Watchdog Timer
ƒƒ Processor
ƒƒ System Chip
ƒƒ Memory
ƒƒ Graphics Engine
ƒƒ Ethernet
ƒƒ LED Indicators
ƒƒ Storage
ƒƒ Expansion
I/O Interfaces
ƒƒ Serial Ports
ƒƒ LAN Ports
ƒƒ USB Ports
ƒƒ Displays
ƒƒ Audio
ƒƒ Power Connector
ƒƒ Grounding Protection
CE, FCC, UL, CCC, BSMI
106 x 139 x 198 mm (4.2" x 5.8" x 7.8")
Regular Size
Aluminum Housing
DIN-rail, Wallmount
2.4kg (5.3lbs)
12V/24VDC ± 20%
41W (Typical), 60W (Max)
Microsoft^® Windows 7/8, WES7/WE8S, Linux
AMI UEFI 128Mbit Flash BIOS
Programmable 6 levels timer interval, from 15 to 255 sec
Intel^® 4th Gen. Core™ i3-4010U ULT 1.7GHz Haswell Dual
Core, 3MB L2
Core i7-4650U/i5-4300U/Celeron 2980U by project
Integrated Intel 8 Series Chipset
On-board 8GB DDR3L 1333/1600 MHz
Intel^® HD Graphics 4400
Intel^® i210-IT GbE
Intel^® i218-LM GbE
LEDs for Power, battery, LAN (Active, Status), Tx/Rx and HDD
One drive bay for SATA 2.5" HDD (Compatible with 9.5mm
height HDD)
CFast drive by iDoor Technology (Optional)
2 x Full-size mPCIe slot, mPCIe 2.0 (1 supports mSATA /
SIM card)
1 x Half-size mPCIe slot w/o USB signal
1x PCIe slot with x1 signal
1 x RS-232, DB9, 50~115.2kbps
2 x RS-422/485, DB9, auto flow control, 50~115.2kbps
4 x RJ45, 10/100/1000 Mbps IEEE 802.3u 1000Base-T Fast
Ethernet, support Jumbo Frame
4 x USB Ports (2 x USB2.0, 2 x USB3.0 compliant )
1 x VGA, supports 1920x1200@60Hz 24bpp
1 x DP 1.2, supports 1920x1080@60Hz 24bpp
Line-Out
1 x 7 Pins, Terminal Block to support dual power input and
remote power control
Chassis Grounding
Digital I/O
ƒƒ 4-ch digital input
ƒƒ 4-ch digital output
Environment
ƒƒ Operating Temperature
ƒƒ Storage Temperature
ƒƒ Relative Humidity
ƒƒ Shock Protection
ƒƒ Vibration Protection
Wet/dry contact with Isolation Protection 2,500 VDC
Compatible 5 V/TTL, Capable Sink: 24 mA max. per channel
- 20 ~ 60°C (-4 ~ 140°F) @ 5 ~ 85% RH with 0.7m/s airflow
(Industry SSD)
- 40 ~ 85°C ( -40 ~ 185°F)
10 ~ 95% RH @ 40°C, non-condensing
Operating, IEC 60068-2-27, 50G, half sine, 11ms
Operating, IEC 60068-2-64, 1Grms, random, 5 ~ 500Hz,
1 hr/axis
Application Software
Version : V2.1 or above
An innovative remote device management software, allowing
efficient remote monitoring, quick recovery & backup, and
real-time remote configuration, to create a more intelligent and
interconnected embedded computing solution.
Version : V7.1 or above
WebAccess, as the core of Advantech’s IoT solution, is full web
browser-based software package for HMI and SCADA software.
All HMI and SCADA software features including: Animated
Graphics Displays, Real-time Data, Control, Trends, Alarms
and Logs, are available in a standard web browser. WebAccess
is built around the latest internet technologies. With its open
architecture, vertical domain applications can easily be
integrated.
Version : V2.0.3.8 or above
Panel Express, a windows based HMI mini SCADA, realizes
the cross platform flexibility offered by WebOP Designer to
switch hardware for the consideration of cost and performance
become an easy job. Panel Express software provides the best
economic and express solution for data intensive high-end
HMI applications.
Version : V2.0.3.8 or above
An easy to use integrated development tool featuring solution-
oriented screen objects, high-end graphics, Windows fonts for
multi-language applications. WebOP runtime, a part of WebOP
Designer, guarantees reliability and performance because of the
minimum system overhead, high communication data rates,
and sub-second screen switching.
Embedded Automation Computers
All product specifications are subject to change without notice
Last updated : 5-May-2015