|
PCLD-785 Datasheet, PDF (1/1 Pages) Advantech Co., Ltd. – 16-ch Relay Board | |||
|
PCLD-785
PCLD-785B
PCLD-885
16-ch Relay Board
24-ch Relay Board
16-ch Power Relay Board
PCLD-785/B
Features
ï§ Compatible with PC-LabCard⢠products with 20-pin digital output connector and
50-pin Opto-22 digital output connector (PCLD-785B only)
ï§ Automatic selection of control logic (PLCD-785B only): Negative logic for the
Opto-22 connector Positive logic for the 20-pin flat cable connector
ï§ Screw terminals for easy output wiring
ï§ LED status indicators
Specifications
Relay
ï§ Channels
ï§ Contact Ratings
ï§ Contact Resistance
ï§ Operation Time
ï§ Insulation Resistance
ï§ Life Expectancy
ï§ Relay Type
ï§ Release Time
PCLD-785: 16 (CN1, 20-pin conn.)
PCLD-785B: 16 (CN1, 20-pin conn.)
24 (CN2, 50-pin conn.)
120 VAC @ 0.5 A, 30 VDC @ 1 A
< 100 mW
5 ms max.
100 MW
AC: 5 x 105 @ 110 V/0.3 A
DC: 5 x 105 @ 24 V/1.25 A
SPDT (Single-Pole Double-Throw) Form C
5 ms max.
General
ï§ Dimensions (L x W)
ï§ Power Consumption
ï§ Connectors
PCLD-785: 114 x 220 mm (4.5" x 8.7")
PCLD-785B: 132 x 220 mm (5.2" x 8.7")
+5 V @ < 100 mA; +12 V @ 33 mA for each relay
20-pin connector:
+5 VDC: Jumper select either PC bus or external supply
+12 VDC: Jumper select either PC bus or external
supply
50-pin connector: external 12 V supply
Ordering Information
ï§ PCLD-785
ï§ PCLD-785B
ï§ PCL-10120-1
ï§ PCL-10120-2
ï§ PCL-10150-1.2
16-ch Relay Board w/ One 1m 20-pin Flat Cable
24-ch Relay Board w/ 20-pin & 50-pin Flat Cables
20-pin Flat Cable, 1 m
20-pin Flat Cable, 2 m
50-pin Flat Cable, 1.2 m
PCLD-885
Features
ï§ Accepts 20-pin or 50-pin (Opto-22 compatible) connectors
ï§ 16 single-pole single-throw (SPST) relays
ï§ High-power relay handles up to 5 A @ 250 VAC
ï§ Onboard varistors protect all relay contact points
ï§ Industrial screw terminals for ease of wiring
ï§ LED status indicators
ï§ +5 V/+12 V power/status LED indicator
Specifications
Relay
ï§ Channels
ï§ Contact Rating
ï§ Contact Resistance
ï§ Insulation Resistance
ï§ Life Expectancy
ï§ Relay On Time
ï§ Relay Off Time
ï§ Relay Type
16
AC: 250 V @ 6 A
DC: 30 V @ 5 A
30 m⦠max.
1000 m⦠@ 500 VDC
>100,000 cycles at rated load
6 ms max.
3 ms max.
SPST (Form A), normally open
Varistor
ï§ Clamping Voltage
ï§ Max. Peak Current
ï§ Max. Applied Voltage
ï§ Varistor Voltage
760 V (10 A)
1,200 A for 8 msec.
300 VRMS AC continuous
470 V (current = 1 mA)
General
ï§ Power Consumption 12 V @ 22 mA for each relay,
352 mA if all relays energized; 5 V @ 200 mA max.
ï§ Connectors
Input:
20-pin flat cable or 50-pin Opto-22 compatible
Output:
Barrier strip screw terminal
ï§ Dimensions (L x W) 205 x 114 mm (8" x 4.5")
ï§ Operating Temperature 0 ~ 60° C (32 ~ 140° F)
Ordering Information
ï§ PCLD-885
16-ch Power Relay Board w/ 20p & 50p Flat Cables
Online Download www.advantech.com/products
|