|
PCI-1712 Datasheet, PDF (1/2 Pages) Advantech Co., Ltd. – 1 MS/s, 12-bit, 16-ch PCI Multifunction Card | |||
|
PCI-1712/L
1 MS/s, 12-bit, 16-ch PCI
Multifunction Card
Features
ï§ 16 single-ended or 8 differential or a combination of analog inputs
ï§ 12-bit A/D converter, with up to 1 MHz sampling rate
ï§ Programmable gain
ï§ Automatic channel/gain scanning
ï§ Onboard FIFO memory (AI: 1,024 samples AO: 32,768 samples)
ï§ Two 12-bit analog output channels with continuous waveform output function
(PCI-1712 only)
ï§ 16-ch digital input and 16-ch digital output
ï§ Three 16-bit programmable multifunction counter/timers on 10 MHz
ï§ Auto-calibration (AI/AO)
ï§ PCI-Bus mastering data transfer
ï§ Pre-, post-, about- and delay-trigger data acquisition modes for analog input
channels
ï§ Flexible triggering and clocking capabilities
RoHS
COMPLIANT
2002/95/EC
Introduction
PCI-1712 and PCI-1712L are powerful high-speed multifunction cards for the PCI bus. They feature a 1 MHz 12-bit A/D converter, an onboard FIFO buffer (storing up to 1024 samples
for A/D, and up to 32,768 samples for D/A conversion). The PCI-1712 cards provide a total of up to 16 single-ended or 8 differential A/D input channels or a mixed combination, two
12-bit D/A output channels, 16 digital input/output channels, and three 10 MHz 16-bit multifunction counter channels. PCI-1712L is a low-cost version without analog output.
Specifications
Analog Input
ï§ Channels
16 single-ended/ 8 differential (software programmable)
ï§ Resolution
12 bits
ï§ Max. Sampling Rate Multi-channel, single gain: 1 MS/s
Multi-channel, multi gain: 600 kS/s
Multi-channel, multi gain, unipolar/bipolar: 400 kS/s
ï§ FIFO Size
1,024 samples
ï§ Overvoltage Protection 30 Vp-p
ï§ Input Impedance
100 MW/10 pF (Off), 100 MW/100 pF (On)
ï§ Sampling Modes
Software, onboard programmable pacer and external
ï§ Trigger Modes
Pre-trigger, post-trigger, delay-trigger and about-
trigger
ï§ Input Range
(V, software programmable)
Unipolar
Bipolar
Accuracy (% of FSR ±1LSB)
N/A 0 ~ 10 0 ~ 5 0 ~ 2.5 0 ~ 1.25
±10 ±5 ±2.5 ±1.25 ±0.625
0.1 0.1 0.2 0.2
0.4
Analog Output (PCI-1712 only)
ï§ Channels
ï§ Resolution
ï§ Output Rate
ï§ FIFO Size
ï§ Output Range
2
12 bits
1 MS/s
32,768 samples
(V, software programmable)
Internal Reference
External Reference
Bipolar
Unipolar
±5, ±10
0 ~ 5, 0 ~ 10
0 ~ +x V @ +x V (-10 ⤠x ⤠10)
-x ~ +x V @ +x V (-10 ⤠x ⤠10)
ï§ Slew Rate
ï§ Driving Capability
ï§ Output Impedance
ï§ Operation Mode
ï§ Accuracy
20 V/µs
10 mA
0.1 W max.
Software polling, continuous output and waveform
output
INLE: ±1 LSB
DNLE: ±1 LSB (monotonic)
Digital Input
ï§ Channels
ï§ Compatibility
ï§ Input Voltage
16
5 V/TTL
Logic 0: 0.8 V max.
Logic 1: 2.0 V min.
Digital Output
ï§ Channels
ï§ Compatibility
ï§ Output Voltage
ï§ Output Capability
16
5 V/TTL
Logic 0: 0.8 V max.
Logic 1: 2.0 V min.
Sink: 8.0 mA @ 0.8 V
Source: -0.4 mA @ 2.0 V
Pacer/Counter
ï§ Channels
ï§ Resolution
ï§ Compatibility
ï§ Max. Input Frequency
ï§ Reference Clock
3
16 bits
5 V/TTL
10 MHz
Internal: 10 MHz, 1 MHz, 100 kHz, 10 kHz
External Frequency: 10 MHz max.
General
ï§ Bus Type
PCI V 2.2
ï§ I/O Connector
1 x 68-pin SCSI female connector
ï§ Dimensions (L x H) 175 x 100 mm (6.9" x 3.9")
ï§ Power Consumption Typical: +5 V @ 850 mA, +12 V @ 600 mA
Max: +5 V @ 1.0 A, +12 V @ 700 mA
ï§ Operating Temperature 0 ~ 60° C (32 ~ 140° F) (refer to IEC 68-2-1, 2)
ï§ Storage Temperature -20 ~ 85° C (-4 ~ 185° F)
ï§ Storage Humidity
5 ~ 95% RH non-condensing (refer to IEC 68-2-3)
Data Acquisition Boards
|
▷ |