PCI-1243U Datasheet, PDF (1/1 Pages) Advantech Co., Ltd. – 4-axis Low Cost Stepping Motor Control Universal PCI Card

PCI-1243U
4-axis Low Cost Stepping Motor
Control Universal PCI Card
Features
 4 axis stepping motor control
 PCI universal bus
 Up to 400 k pulse output rate
 T-curve acceleration/deceleration
 Pulse/Dir and CW/CCW pulse output mode
 Up 24-bit step count
 Opto-Isolated Digital input and output
 Up to 1,500 Vrms system isolation
 BoardID^TM switch
Introduction
PCI-1243U is a 4-axis intelligent stepping motor control card with universal PCI interface. The card’s PCD-4541 motion controller can execute a variety of motion-control commands.
For advanced applications, we supply a DLL so that programs can be created for the Microsoft^® Windows^® environment.
PCI-1243U is a cost-effective solution for PCI based motion control. Each axis can be controlled directly through the card’s I/O registers. However, use of the card’s high-level DLL
driver is recommended. With the DLL driver, you can easily link to VC++^®, Visual Basic^® or BCB.
Specifications
Pulse Type Motion Control
 Motor Driver Support Stepping
 Number of Axes
4
 Max. Output Speed 400 kpps
 Step Count Range
0 ~ 16, 777, 215
 Pulse Output Type
Pulse/Direction, CW/CCW
 Position Counters
±16, 777, 215
 Home Modes
4
 Velocity Profiles
T or S-curve acceleration/deceleration
 Local I/O
Machine Interfaces:
General Inputs:
General Outputs:
PEL x 4, NEL x 4, ORG x 4, SLD x 4, EMG x 1
8
8
Isolated Digital Input
 Channels
8
 Input Voltage
Logic 0: 1 V
Logic 1: 12 V (24 V max.)
 Isolation Protection 3,750 VRMS
 Opto-Isolator Response 25μs
 Input Resistance
4.7 kW
Isolated Digital Output
 Channels
8
 Output Type
Sink (NPN)
 Isolation Protection
 Output Voltage
 Sink Current
3,750 VRMS
5 ~ 30 VDC
200 mA max./channel; 1.1 A max. total
 Opto-Isolator Response 25μs
General
 Bus Type
PCI V2.2
 Certifications
CE
 Connectors
1 x DB-62 female
 Dimensions
175 x 100 mm (6.9" x 3.9")
 Power Consumption Typical: 5 V @ 340 mA
Max: 5 V @ 500 mA mA
 Storing Humidity
5 ~ 95% RH, non-condensing (IEC 68-2-3)
 Operating Temperature 0 ~ 60° C (32 ~ 140° F)
 Storing Temperature -20 ~ 80° C (-4 ~ 170° F)
Ordering Information
 PCI-1243U
 PCL-10162-1
 PCL-10162-3
 ADAM-3962
 ADAM-3943
4-axis Stepping Motor Control card
DB-62 Cable Assembly, 1 M
DB-62 Cable Assembly, 3 M
DB-62 wiring terminal with DIN-rail mounting
PCI-1243U wiring board with LED
Online Download www.advantech.com/products