|
PCI-1240U Datasheet, PDF (1/1 Pages) Advantech Co., Ltd. – 4-axis Stepping and Servo Motor Control Universal PCI Card | |||
|
PCI-1240U
4-axis Stepping and Servo Motor Control
Universal PCI Card
Features
ï§ Independent 4-axis motion control
ï§ Hand wheel and jog function
ï§ 2/3-axis linear interpolation function
ï§ 2-axis circular interpolation function
ï§ Continuous interpolation function
ï§ Programmable T/S-curve acceleration/deceleration rate
ï§ Up to 4 Mpps output for each axis
ï§ Two pulse output types: CW/CCW or pulse/direction
ï§ Up to 1 MHz encoder input for each axis
ï§ Two encoder pulse input types: A/B phase or up/down
ï§ Constant speed control
ï§ Position management and software limit switch function
ï§ BoardID⢠switch
RoHS
COMPLIANT
2002/95/EC
Introduction
Advantech introduces the PCI-1240U 4-axis Universal PCI (supports both 3.3 V and 5 V signal slot) stepping/pulse-type servo motor control card designed for general-purpose
extreme motion applications. The PCI-1240U is a high-speed 4-axis motion control card for the PCI bus that simplifies stepping and pulse-type servo motor control, giving you
added performance from your motors. The cardâs intelligent NOVA® MCX314-motion ASIC builds in a variety of motion control functions, such as 2/3-axis linear interpolation, 2-
axis circular interpolation, T/S-curve acceleration/deceleration rate and more. In addition, the PCI-1240U performs these motion control functions without processor loading during
driving. For advanced applications, Advantech supplies Windows® DLL drivers and user-friendly examples to decrease your programming load. Moreover, through a free bundled
PCI-1240U motion utility, you can complete configuration and diagnosis easily.
Specifications
Pulse Type Motion Control
ï§ Motor Driver Support Pulse-type servo/stepping
ï§ Number of Axes
4
ï§ Interpolation
2-axis linear, 3-axis linear, 2-axis circular
ï§ Max. Output Speed 4 Mpps
ï§ Step Count Range
±2, 147, 483, 646
ï§ Pulse Output Type
Pulse/direction (1-pulse, 1-direction type) or
CW/CCW (2-pulse type)
ï§ Position Counters
Range of command and actual position
ï§ Velocity Profiles
T-Curve, S-Curve
ï§ Local I/O
Machine Interfaces:
Servo Driver Interfaces:
Position Compare I/O:
General Inputs:
General Outputs:
PEL x 4, MEL x 4, ORG x 4
ALM x 4, INP x 4
CMP x 4
12 (IN0 ~ 2 of each axis)
16 (OUT4 ~ 7 of each axis)
Encoder Interface
ï§ Input Type
ï§ Counts per Enc. Cycle
ï§ Input Range
ï§ Isolation Protection
ï§ Max. Input Frequency
Quadrature (A/B phase) or up/down
x1, x2, x4 (A/B phase only)
5 ~ 25 V
2,500 VDC
1 MHz
General
ï§ Bus Type
Universal PCI V2.2
ï§ Certifications
ï§ Connectors
ï§ Dimensions (L x H)
CE
1 x 100-pin SCSI female connector
175 x 100 mm (6.9" x 3.9")
ï§ Power Consumption Typical: 5 V @ 850 mA
Max.: 5 V @ 1 A
ï§ Humidity
5 ~ 95% RH, non-condensing (IEC 68-2-3)
ï§ Operating Temperature 0 ~ 60° C (32 ~ 140° F)
ï§ Storage Temperature -20 ~ 85° C (-4 ~ 185° F)
Ordering Information
ï§ PCI-1240U
ï§ ADAM-3952
ï§ PCL-101100M-1
ï§ PCL-101100M-3
ï§ PCL-10251-1
ï§ PCL-10251-2
ï§ PCL-10251-3
4-axis Servo Motor Control PCI Card
50-pin DIN-rail SCSI Wiring Board
100-pin SCSI Cable, 1 m
100-pin SCSI Cable, 3 m
100-pin SCSI to Two 50-pin SCSI Cable, 1 m
100-pin SCSI to Two 50-pin SCSI Cable, 2 m
100-pin SCSI to Two 50-pin SCSI Cable, 3 m
Motion Control I/O Modules
|