NETARIUM-2V2_14 Datasheet, PDF (1/2 Pages) Advantech Co., Ltd. – 3U 2-Slot AdvancedTCA 3U 2-Slot AdvancedTCA with Advantech Shelf Manager support

Netarium^™_-2v2
3U 2-Slot AdvancedTCA
Reference Platform
with Advantech Shelf Manager support
Features
ƒƒ 3U 2-slot 19" rackmount ATCA shelf with integrated server blades
ƒƒ 2 front slots with power distribution and cooling for up to 300W per slot
ƒƒ 2 rear transition module (RTM) slots
ƒƒ Supports two redundant Advantech Shelf Managers with Telco alarm signals
ƒƒ 40G ATCA-compliant backplane with cross-connected Base and Fabric
Interfaces, handles up to 10 Gbps and 3.125 Gbps per differential pair
ƒƒ Redundant AC and DC power options
ƒƒ Right-to-Left Push-Pull Cooling Mode
ƒƒ Hot swappable FRUs (blades, RTMs, fan trays, power modules, and ShMM)
ƒƒ PICMG 3.0 (AdvancedTCA Base Specification) Compliance
RoHS
COMPLIANT
2002/95/EC
Introduction
Advantech’s Netarium™ series of ATCA reference systems are specifically targeted to help network equipment providers reach superior levels of performance over traditional rackmount
servers or appliances and extend their product range at the high end. The series represents a new generation of systems which offer higher performance, greater scalability and extreme
flexibility by using the latest 40 Gigabit Ethernet (40G) backplanes, switches and application blades. Advantech optimizes the systems to achieve the highest possible density at the
rack level, enabling a maximum number of processor cores, network ports and switching capacity.
Each system is tailored for customers to rapidly deploy in data communication markets for applications which require faster and deeper packet processing such as policy and
charging enforcement, network security, real-time traffic monitoring, load balancing, subscriber analytics and content optimization among others. As ATCA was designed to meet the
carrier-grade constraints of the telecom industry, the systems integrate the chassis, cooling, power distribution and shelf management into an off-the-shelf platform solution capable
of superior 5 NINES availability and reliability.
Netarium™-2v2, which supports Advantech’s SMM-5060 Advanced Shelf Management Module, providing IPMI2.0 and ATCA compliant shelf management, is the ultimate in entry
level flexibility. This 2-slot platform allows OEMs to redeploy common platform hardware which scales when needed. Based on the MIC-5333 it packs more processing power than
previous generation 6-slot systems. With an increase in miniaturization and performance at the blade level it is accompanied by a new concept at the mezzanine level to bring more
I/O and acceleration closer to the processing cores. With four FMM sites on each ATCA blade and RTM, the MIC-5333 integrated into the Netarium™-2 Reference System offers the
broadest flexibility in entry level system performance on ATCA.
Many different payloads can be integrated into Advantech Netarium™ systems and configured to address diverse industry applications. For more details on integrating a specific
configuration please contact your local sales representative.
Specifications
Number of slots
Backplane
Front blades
RTM’s
IPMB
Base interface
Fabric interface
Cooling
Accessibility
Power
Shelf management
Miscellaneous
Physical Characteristics
Technology
Max. Capacity
Air filter
Front
Rear
AC
PSU cooling
DC feed
DC voltage
Current rating
Full featured
Interfaces
Telco alarm
Sensors
ESD plug
Cable management
Dimensions (H x W x D)
Weight
2 ATCA compliant node blades
2 ATCA rear transition modules
Bussed (radial available on request)
Dual star, 1000 Base-T
Full mesh, 3.125Gbps or 10Gbps per differential pair
Two front pluggable, hot swappable push-pull fan trays with N+1 redundant fans
(no degradation with a single fan failure)
>CPTA B.4, 300W/slot
One hot swappable air filter on the right side of chassis
ATCA blades, ShMC’s, front fan trays
RTM’s, PEM’s / AC PSU’s
Integrated dual, redundant AC power supplies, 850W
Self cooled
2 redundant, hot swappable PEMs w. integrated EMI filters
-36V to -72V (Nominal -48V)
30A per feed
Dual, redundant enhanced shelf managers based on Advantech SMM-5060
RMCP, SSH, SNMP, CLI, Web and serial interfaces
Telco alarm signals, populated on each ShMM
FRU presence, fan health, PSU health, temperatures, input voltages
Front and rear
Front / rear cable trays (optional)
3U x 19" x 462 mm
10kg (chassis weight only)
All product specifications are subject to change without notice
Last updated : 23-Jun-2014