MIC-5322 Datasheet, PDF (1/2 Pages) Advantech Co., Ltd. – AdvancedTCA® 10GbE Dual Socket CPU Blade with Intel® Xeon® 5500 Series Processor

MIC-5322
NEW
AdvancedTCA^® 10GbE Dual Socket CPU Blade
with Intel^® Xeon^® 5500 Series Processor
Features
 Two Dual-Core or Quad-Core Intel^® Xeon 5500 processor (Nehalem-EP)
 Intel^® 5520 IOH36D/ICH10R server class chipset
 6 DDR3 VLP DIMMs up to 48 GB with ECC support
 Two XAUI ports on Fabric interface
 Two 1000BASE-T ports on Base interface
 Two 1000BASE-T front panel ports
 Two USB2.0 front panel ports
 Fully managed, hot swappable RTM
Introduction
RoHS
COMPLIANT
2002/95/EC
The MIC-5322 is a dual processor Intel^® Xeon^® 5500-based ATCA blade complementing the single processor MIC-5320 for systems able to cool over 200W per-slot. The underlying
architecture and drivers remain identical to the MIC-5320 thereby enhancing performance scalability and streamlining software re-use between blades. The MIC-5322 enables the
highest performance available in ATCA form factor with 8-cores and 16-threads of processing power, low DDR3 memory latency, fast PCI Express 2.0 and accelerated virtualization,.
The Intel 82599 10 GbE controller plays a key role in end-to-end network performance and throughput, including a 5 Gbps PCI Express 2.0 interface to improve the entire data path as
well as multi-core optimized queue support. For fast and secure database applications, the blade supports up to 48 GB of triple channel DDR3 with ECC. Next generation processor
readiness offers a smooth upgrade path to future processors supporting more than 4 cores.
The MIC-5322 adheres to Advantech’s Common rear transition modules (RTM) definition developed to maximize interoperability and re-use between RTM’s and ATCA blades. This
defines the management interface and RTM port mapping for interconnects such as USB, PCIe, XAUI and SAS and allow RTM re-use among blades to simplify system integration as
well as life cycle and upgrade management. The MIC-5322 provides hot-swappable RTM support for High Availability(HA) needs as well as rear I/O and SAS storage support with
RAID via the RTM-5101.
Dual bootable USB industrial flash drives add capabilities for emergency and parameters storage, diagnostic routines and minimum kernel needs, whilst a CompactFlash socket is
available for True IDE mode flash usage. Serial over LAN (SoL) support is provided on the base fabric and external GbE. HPM.1 based updates are available for all programmable
components including rollback support and IPMI controlled BIOS write protect through a single update procedure. CMOS Override capabilities allow CMOS RAM to be altered over IPMI
and settings can be changed from multiple sources. MAC address mirroring allows the MAC address to be read over IPMI even if the processor is powered down and helps to relate
MAC address and physical/logical board location. Additional support is provided for Intel PECI, application driven event logging and FRU EEPROM space is reserved for ODM use.
On-board FPGA design facilitates customer-specific modifications and the core board design can be modified or adapted to other form factors through Advantech’s D&MS customization
services
ZD Connectors Intel 1GbE/10GbE base
Six DDR3 VLP DIMMs to RTM
and fabric interfaces
Six DDR3 VLP DIMMs
Two 10/100/1000BASE-T ports miniUSB
console port
User/Status LEDs
Two USB ports RJ-45 console port